Question 1

Should I choose the DIYPC DIY-ATX08-Wood or the Montech AIR 903 MAX for a high-airflow gaming PC?

Accepted Answer

Choose the DIYPC DIY-ATX08-Wood if you want a walnut wood design, four included 120 mm PWM fans, top-mounted 360 mm radiator support, and up to 420 mm of GPU clearance. Choose the Montech AIR 903 MAX if cooling performance and component flexibility are the main priorities: it includes three 140 mm ARGB PWM front fans plus one 140 mm rear fan, supports E-ATX motherboards, and has been measured by Tom’s Hardware as delivering strong thermal performance. The Montech supports GPUs up to 400 mm, so the DIYPC offers slightly more listed GPU clearance.

Question 2

Is the DIYPC DIY-ATX08-Wood a better alternative to the Fractal Design North?

Accepted Answer

Choose the DIYPC DIY-ATX08-Wood when you prefer a more spacious layout, four pre-installed fans, top 360 mm radiator support, and up to 420 mm of GPU clearance. Choose the Fractal Design North when independently tested thermal performance, a wood-accented design, and Fractal’s documented compatibility guidance are more important. The North supports up to a 355 mm GPU and a 170 mm CPU cooler, while the DIYPC lists 420 mm GPU and 174 mm CPU-cooler clearance.

Question 3

How does the DIYPC DIY-ATX08-Wood compare with a basic two-fan ATX case such as the DIYPC Solo-T2-BK?

Accepted Answer

The DIYPC DIY-ATX08-Wood is the stronger choice for a gaming or upgrade-focused build because it includes four PWM fans, USB Type-C, a top mesh panel, support for up to a 360 mm radiator, and substantially larger listed GPU and CPU-cooler clearances. A basic two-fan case such as the DIYPC Solo-T2-BK is more suitable for a lower-cost system with modest cooling requirements and fewer expansion plans.

Question 4

Should I buy the DIYPC DIY-ATX08-Wood or move up to the DIYPC ARGB-N3-BK?

Accepted Answer

Choose the DIYPC DIY-ATX08-Wood for a quieter-looking workspace design with walnut wood, standard ATX compatibility, four included PWM fans, and up to 420 mm of GPU clearance. Move up to the DIYPC ARGB-N3-BK if you need E-ATX support, multiple tempered-glass panels, more extensive fan capacity, ARGB lighting, or compatibility with supported back-connect motherboard layouts. The higher-tier ARGB-N3-BK provides more customization, while the DIY-ATX08-Wood keeps the build visually simpler.

Question 5

Is the DIYPC DIY-ATX08-Wood suitable for a portable PC build?

Accepted Answer

The DIYPC DIY-ATX08-Wood is better suited to a desk-based performance build than frequent transport. It is an ATX mid-tower measuring approximately 18 x 8.9 x 17.84 inches and includes tempered glass, steel, and a wood front panel. Choose a smaller Micro-ATX or Mini-ITX case for easier carrying; choose the DIYPC when full-size ATX compatibility, large GPU clearance, multiple fans, and radiator support matter more than portability.

Question 6

Will this case fit my ATX motherboard, large graphics card, and CPU cooler?

Accepted Answer

Yes. The case supports ATX, Micro ATX, and Mini ITX motherboards, graphics cards up to 420 mm long, and CPU coolers up to 174 mm tall. Confirm your specific component dimensions before building, especially if using a front radiator or unusually thick graphics card.

Question 7

Is this case suitable for liquid cooling or a 360 mm CPU radiator?

Accepted Answer

Yes. The case supports a radiator up to 360 mm in the top position. Radiator thickness, fan placement, motherboard heatsinks, memory height, and graphics card clearance can affect compatibility, so check the cooler manufacturer's dimensions before installation.

Question 8

How many fans are included, and is the airflow adequate for a gaming PC?

Accepted Answer

Four 120 mm PWM fans are pre-installed: three at the front for intake and one at the rear for exhaust. The case can support up to 12 fans and has a top mesh section, providing a solid starting layout for gaming or other heat-producing builds. Additional fans may be useful for high-power components.

Question 9

Does it include a power supply, and how large a PSU can it accommodate?

Accepted Answer

No. This is an empty ATX mid-tower case, so the power supply must be purchased separately. It supports a PSU up to 240 mm long with a bottom-mounted installation; verify the PSU length and cable clearance for your planned build.

Question 10

Who is this case best suited for, and what are the main trade-offs?

Accepted Answer

It is best suited for users building or upgrading a desktop gaming PC, workstation, or general-purpose ATX system who want broad component compatibility, strong cooling capacity, tempered-glass visibility, and a walnut wood front panel. The main trade-offs are that it is not portable, does not include a power supply or computer components, and offers only two 3.5-inch bays and two 2.5-inch bays.

Type	ATX Mid Tower
Color	Black
Case Material	Steel / Tempered Glass
With Power Supply	No
PSU Mount	Bottom
Motherboard Compatibility	ATX / Micro ATX / Mini ITX
Side Panel	1 x Side Tempered Glass Panel

Fan Options	Top: 3 x 120mm fan or 2 x140mm fan (Optional) Front: 3 x 120mm PWM fans (pre-installed) MB Side: 2 x 120mm fan (Optional) Rear: 1 x 120mm PWM fan (pre-installed) PSU top : 3 x 120mm fan (Optional)
Pre-installed Fans	Front - 3 x 120mm / Rear - 1 x 120mm
Radiator Options	Top - Up to 360mm

Max GPU Length	420 mm
Max CPU Cooler Height	174 mm
Max PSU Length	240 mm
Dimensions	18" x 8.9" x 17.84"

Backordered Items

DIYPC DIY-ATX08-Wood Black USB3.0 /Type C ATX Mid Tower Gaming Computer Case w/ Tempered Glass Side Panel and Walnut Wood Front Panel, 4 x 120mm PWM Fans Pre-Installed

Learn more about the DIYPC DIY-ATX08-Wood

Customer Reviews of the DIYPC DIY-ATX08-Wood

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

Internal 3.5" Drive Bays	2
Internal 2.5" Drive Bays	2
Expansion Slots	7

Model
Brand	DIYPC
Model	DIY-ATX08-Wood

Item#: N82E16811353271