Question 1

The liquid cooler helix on the face of the case is RED will that color change with RGB color settings or is it always red ?

Accepted Answer

No it can change to bunch colors mine came with a remote control to control the lighting can pick preset colors or has a color wheel to select colors can be solid color or cycle threw all the colors can make it flash fast or slow like it's breathing.  Hope that helps ya out

Question 2

For some reason my pump lights and the front spiral light wont turn on. The fan on the pump will turn on and computer temp will stay around 28-30 temp. Anyone have ideas why the pump light and spiral wont turn on?

Accepted Answer

Also had this problem, on the top left side of your case there is a button you can press to turn the spiral LEDS on and off, of that does not work what you need to do is change the position of the power cords for the LEDS on the front panel of the case, all you have to do is keep switching switching the cords till all of your LEDS turn on.

Question 3

Where do i put my optical drive???

Accepted Answer

Good question.  There isn't a place for it.  You might want to get an external optical drive for this build.

Question 4

does this case come with a disk drive?

Accepted Answer

This case does not come with a disk drive.

Question 5

Is the liquid paste that is included good?

Accepted Answer

Not sure, didn't use it.. Bought Thermal Grizzly Kryonaut

Question 6

I'm trying to figure out the RGB cable, problem is I found the box that probably reacts with the remote, but the cable that out puts ends in a massive piece far too big to connect to the MOBO. I found the right cable in my bag of cables from when i built it. However, If i disconnected the box from the cords, wouldn't that make the remote useless?

Accepted Answer

Hi Paul,
What I did since my motherboard did have that plug in. This is what I did  I went to box that controls the remote connect all the cable except the 4 pin this cable can be use to connect to the same power source as one of the fans with a 4 pin to 2, 3 pin adaptor.

Question 7

Is the tubing red or is the liquid inside of it red?

Accepted Answer

The glass inside the front cylinder and on the pump block combo is actually clear, the liquid inside is colored, as evident from pictures of some samples with air bubbles showing clear glass.

Question 8

I like this Case, but i dont want the water device to be red, but i do want RGB lighting,  will the front water cooler helix change color as well or will it stay red ?

Accepted Answer

Hi, 
There is an rgb light surrounding the front helix that will change color. The helix itself however is red, and glows red when used in combination with certain colors

Question 9

Looking at buying an "ASUS ROG Strix Radeon RX 580." Will this card fit mounted vertically?

Accepted Answer

yes

Question 10

Does the asus 1080ti rog fit on the vertical mount?

Accepted Answer

Yes, but I do not recommend it, it will be starved for air and temps will increase. Any card that goes over the 2bslot width will not work properly

Brand	Deepcool
Model	GENOME ROG

Type	ATX / Micro ATX Mid Tower
Color	RGB Color LED
Case Material	SGCC+PLASTIC (ABS)(Panel thickness: 0.8mm)
With Power Supply	No
Power Supply	ATX PS2
LED	RGB

Internal 3.5" Drive Bays	2
Internal 2.5" Drive Bays	2
Expansion Slots	7 (plus 2 extra slots for vertical VGA card installation)

120mm Fans	Rear: 1 x 120mm fan (Pre-isntalled) Front: 2 x 120mm or 1 x 200mm fan (Optional)
360mm Fans	Top: 360mm liquid cooling system

Max GPU Length	330mm
Max CPU Cooler Height	165 mm
Dimensions (H x W x D)	19.88" x 8.27" x 19.92"
Weight	21.54 lbs.

DEEPCOOL GENOME ROG Certified Edition PC Case with Integrated 360mm Liquid Cooling System and Aura RGB Lighting System

Learn more about the DEEPCOOL GENOME ROG

Customer Reviews of the DEEPCOOL GENOME ROG

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811853044