Question 1

Need some recommendations on case, power, drive (8G is plenty) etc to companion this board. The application is Centos running asterisk PBX. 
As an aside to you have a service that assembles the unit and ships it fully assembled?
Thanks - J

Accepted Answer

I used the following: M350-enclosure-with-picoPSU-80-and-60W-adapter from mini-box dot com (can't give link because newegg forbids it, but it really is an excellent case for the price) The only downside is the 4 pin adapter doesn't reach on the board so I extended it by cutting the wires and soldering in a extension, you could just have easily used this though: http://www.newegg.com/Product/Product.aspx?Item=N82E16812198024&Tpk=4pin%20atx%20extension. I used a small 32Gb Sandisk SSD and 2 1gb sticks of memory (it is a pfsense box for me). It stays amazingly cool and the fan runs slow enough that it is near silent. I've really liked the board.

Question 2

Thanks to all those that answered my earlier question, much appreciated. I have a follow up, has anyone used the network interfaces to support VLANs?
Thanks - J

Accepted Answer

I have, I currently use a system called PF Sense. It is an opensource free software that can be installed as a stand alone software for on any PC that's soul use is as a firewall type system. The software can be tedious to initialize, however once it working, you can have a virutal lan setup for your network, and give it any rage you want. You will need at minimum two Ethernet cards one for incoming (ISP) and one for outgoing (vlan, your network).

Question 3

Has anyone tested this board with low voltage ddr3 modules? (1.35v or less)

If so which ones did you use and was it worth it over the cheaper 1.5v modules?

Accepted Answer

Think I used some mushkin modules. The savings is minimal however these modules are voltage compatible with Skylake and Kaby Lake boards with DDR3L recomended which may mean the modules could be reused in the future. The low voltage recomendation is from intel and while they make Skylake compatible boards that fit regular DDR3 the increased voltage may damage your cpu over the long term. (Google it)

Brand	GIGABYTE
Model	GA-C1007UN-D
Combo Type	Motherboard / CPU / VGA Combo

CPU	Intel Celeron 1007U
With Cooler	Yes

Number of Memory Slots	2x240pin
Memory Standard	DDR3 1333/1066
Maximum Memory Supported	16GB
Channel Supported	Dual Channel

Audio Chipset	Realtek ALC887
Audio Channels	7.1 Channels

LAN Chipset	Realtek GbE LAN chips
Second LAN Chipset	Realtek GbE LAN chips
Max LAN Speed	2 x 1Gbps

GIGABYTE GA-C1007UN-D Intel Celeron 1007U Intel NM70 Mini ITX Motherboard / CPU / VGA Combo

Learn more about the GIGABYTE GA-C1007UN-D

Customer Reviews of the GIGABYTE GA-C1007UN-D

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

PS/2	1 x PS/2 keyboard port 1 x PS/2 mouse port
COM	1
Video Ports	D-Sub
HDMI	1 x HDMI
USB 1.1/2.0	4 x USB 2.0
eSATA	1 x eSATA 3Gb/s
Audio Ports	3 Ports

Physical Spec
Form Factor	Mini ITX
Dimensions (W x L)	6.7" x 6.7"

Item#: N82E16813128598