Question 1

what revision number is this motherboard? 1.0, 1.1, or 1.2

Accepted Answer

The key indicator is the Wi-Fi module listed in the specifications: Qualcomm® Wi-Fi 7 QCNCM865. On Gigabyte's official product documentation, the different revisions for the TRX50 AERO D are distinguished by their wireless card. Rev. 1.0: Uses the Qualcomm Wi-Fi 7 QCNCM865, Rev. 1.1: Uses the MediaTek Wi-Fi 7 MT7927 (RZ738) and Rev. 1.2: Uses the Realtek Wi-Fi 7 RTL8922BE. this specific listing is with a Qualcomm® Wi-Fi 7 QCNCM865 so its Rev 1.0.

Question 2

Is the GIGABYTE TRX50 AERO D motherboard compatible with AMD Threadripper processors?

Accepted Answer

The TRX50 AERO D is compatible with the Threadripper 7000 processors.  I have 2 of these, they are good MB's.  Best BIOS for Threadripper TRX50.

Question 3

Does Rev. 1.1 support S3 sleep mode? Rev. 1.0 does not.

Accepted Answer

Yes.  I am using Kingston Fury Renegade Pro R-DIMMs with EXPO enabled.

Question 4

Which well reviewed AIO cooler covers the full area of STR5 CPU?

Accepted Answer

I don't know about "well reviewed". Puget Systems says they'll be using the Asetek 836S-M1A. That seems to be unavailable at retail. AMD has a list of approved coolers for the 7000X series. A couple of them (Enermax LIQTECH TR4 II Series 360mm, Silverstone IceGem 360) have large cooling plates, but a number of unfavorable reviews. I'm trying one from Alphacool. Their Eisbaer Pro series have large plates. The fans they include are supposed to be noisy. I've swapped in some Phanteks T30 fans. (I had to obtain some 35mm long M3 screws, as the Alphacool radiators use metric screws.) They're not very noisy at 2000RPM, although they are audible.

In my opinion, there is no well-established AIO cooler for the Threadripper 7000 series at the moment.

Question 5

is this compatible with threadripper 7970x

Accepted Answer

Yes, it supports AMD Ryzen Threadripper 7000 Series processors, which includes the Threadripper 7970X.

Question 6

Which ram for 128gb

Accepted Answer

The motherboard supports up to 1TB of DDR5 memory with 4 DIMM slots, allowing for a maximum single DIMM capacity of 256 GB. Therefore, you can use RAM modules that support DDR5 and have a total capacity of 128 GB across the slots.

Question 7

is this compatible with threadripper 9960x

Accepted Answer

Yes, it supports AMD Ryzen™ Threadripper™ 7000 Series processors, which includes the Threadripper 9960X.

Question 8

Is it compatible with the AMD Threadripper 9960X processor?

Accepted Answer

Yes, it supports AMD Ryzen Threadripper 7000 Series processors, which includes the AMD Threadripper 9960X.

Question 9

Which revision is being sold by Newegg?

Accepted Answer

I'd also like an answer to this question. I haven't seen any website display the revision number.

CPU Socket Type	AM5
CPU Type	AMD Socket sTR5, support for: AMD Ryzen™ Threadripper™ PRO 7000 processors / AMD Ryzen™ Threadripper™ 7000 Series processors (Go to GIGABYTE's website for the latest CPU support list.)

Number of Memory Slots	4x288pin (DDR5)
Memory Standard	Support for DDR5 7800(O.C.)/7600(O.C.)/7200(O.C.)/7000(O.C)/6800(O.C.)/6400(O.C.)/6000(O.C.)/5600(O.C.)/5200/4800/4400 MT/s ECC Registered memory modules (RDIMM/RDIMM-3DS) 4 x DDR5 DIMM sockets supporting up to 1TB (256 GB single DIMM capacity) of system memory Quad channel memory architecture Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" on GIGABYTE's website for more information.)
Maximum Memory Supported	1TB

PCI Express 5.0 x16	2 x PCI Express x16 slots, supporting PCIe 5.0 and running at x16 (PCIEX16_1/PCIEX16_2) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot.
PCI Express 4.0 x16	- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16(PCIEX16_3)

Serial ATA (SATA)	8 x SATA 6Gb/s connectors
M.2	CPU: - 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support) (M2C_CPU) - 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU/M2B_CPU) - 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2D_CPU)
SATA RAID	RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices RAID 0, RAID 1, and RAID 10 support for SATA storage devices

Max LAN Speed	Marvell® AQtion AQC113C 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) (LAN1) Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) (LAN)
Wireless LAN	Qualcomm® Wi-Fi 7 QCNCM865 - 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz carrier frequency bands - BLUETOOTH 5.3 - Support for 11be 320MHz wireless standard (Actual data rate may vary depending on environment and equipment.) Note: Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10) Wi-Fi 7 channels on 6GHz band availability depends on individual country's regulations.

Best Sellers

GIGABYTE TRX50 AERO D sTR5 AMD TRX50 EATX Motherboard - DDR5, PCIe 5.0 M.2, PCIe 5.0, USB4 Type-C, Wi-Fi 7, Marvell 10GbE

Learn more about the GIGABYTE TRX50 AERO D

Customer Reviews of the GIGABYTE TRX50 AERO D

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Physical Spec
Form Factor	E-ATX
Dimensions (W x L)	30.5cm x 26.4cm

Item#: N82E16813145484