Question 1

Would this power supply work without using Corsair Link?

Accepted Answer

You do not need to buy the corsair link kit for this to work.  it has it built in, all you have to do is plug in the usb cable to the power supply and plug the other end to the motherboard usb headers and then download the corsair link software.  If you don't want to use corsair link that's fine too just don't plug in the usb cable.

Question 2

Can this be mounted on the top and/or bottom of the Full tower? Does it have a this side up specification? Would mounting it upside down hurt it or lower it's life span in any way? I would be mounting it in the top back of my tower - having it suck hot air out from inside the case to the back. No vents on top of my tower all solid top.

Accepted Answer

The direction it is mounted will not effect its lifespan in any way. Though it will increase air flow a bit, I wouldn't recommend relying on your power supply as your only source of exhaust for your case. If your case is running hot, and you don't have any extra spots to add case fans, I would highly recommend getting a high airflow case. Or a liquid CPU cooler which would do a great job of lowering your case temp by removing the CPU heat sync from the middle of your case.

Question 3

Does this work with ASUS Crosshair V Formula-Z AM3+ with AMD FX-FX-9590 Series? By that i mean does it have the CPU power connectors for the 8-pin and 4-pin CPU power connectors to populate them?

Accepted Answer

Wilfredo Yes it works!and No it doesn't have the extra 4pin but it is not necessary on your mobo unless you plan to do really extreme overclocking like with LN, so yes this will work perfect for you!

You can also check your mobo manual it says it somewhere in there of how is optional, also if you really wanted to use it, well you cal always get a molex to 4 pin adapter.

Good luck.

Question 4

The case that I have will only allow me to install this PSU fan side down, what is on the other side? a big ugly specs sticker?

Accepted Answer

I installed my PSU fan side down. I'm pretty sure most installations are that way. The fan sucks air from the bottom side of the case and then exhausts out the back side of the PSU.  I have no sticker on top of my PSU, possibly i removed it or it was never there, I can't recall.

Question 5

what is the length of the 24 pin ATX cable? It's not mentioned in the specs.
Thanks

Accepted Answer

I have already built my PC so without removing this cable, that's a hard question to answer. I would say it plenty long enough unless you have an unusual build that calls for a longer cable. Just search with Google using the name of the Power Supply and the name of the cable. Several suppliers will appear.  Good luck.

Question 6

Am I able to run two GTX970s?

Accepted Answer

Yes. I am running two 980s in sli with this in my system.

Question 7

Is this psu compatible with SATA II hard drives?

Accepted Answer

Absolutely!  Every SATA power plug is similar apart from micro sata like laptop cd/dvd.  I've had no problems with this power supply at all.  Powerful, quiet and efficient!

Question 8

what are the dimensions?

Accepted Answer

Hi,

150mm (w) x 86mm (h) x 180mm (l).

5.90in. (w) x 3.38in. (h) x 7.08in. (l).

Easily fit into my Corsair 350D case. Works great...like the Corsair Link software, and the ability to set the fan speed on these hot days in CA.

Question 9

How long is the +12v 8-pin CPU connector? (Will it reach the 8-pin CPU connector on the Motherboard if ran through the back of the case, or will it require an extension)

Accepted Answer

It worked for my Corsair atx case but it was pretty tight.

Question 10

will this psu work with the crossblade ranger   and amd a10-7870k?

Accepted Answer

Yes.

Brand	CORSAIR
Series	HXi Series HX1000i
Model	CP-9020074-NA

Type	ATX12V v2.4 / EPS12V 2.92
Maximum Power	1000 W
Fans	1 x 140mm Thermally Controlled Fluid Dynamic Bearing Fan
PFC	Active
Main Connector	20+4Pin
+12V Rails	Single or Multi
PCI-Express Connector	8 x 6+2-Pin
SATA Power Connector	12
SLI	SLI Ready
Haswell Support	Yes
CrossFire	CrossFire Ready
Max PSU Length	180 mm
Modular	Full Modular
Efficiency	92%
Energy-Efficient	80 PLUS PLATINUM Certified
Over Voltage Protection	Yes
Input Voltage	100 - 240 V
Input Frequency Range	47 - 63 Hz
Input Current	13 - 6.5A
Output	Single +12V Rail Mode: +3.3V@25A, +5V@25A, [email protected], [email protected], +5VSB@3A Multiple +12V Rail Mode: +3.3V@25A, +5V@25A, +12V1@40A, +12V2@40A, +12V3@40A, +12V4@40A, +12V5@40A, +12V6@40A, +12V7@40A, +12V8@40A, -12V0.8A, +5VSB@3A
MTBF	100,000 hours
Approvals	FCC, ICES, CE, UL / CUL, CSA, C-Tick/RCM, TUV, CB, CU, KC Mark, RoHS, WEEE, RoHS (China), REACH.
Connectors	1 x ATX Connector 2 x EPS Connector 2 x Floppy Connector 12 x 4-Pin Peripheral Connector 8 x PCIe Connector 12 x SATA Connector

Dimensions	3.39" x 5.91" x 7.09"
Weight	7.92 lbs.

Meet Your Seller

Sponsored Products

CORSAIR HXi Series HX1000i 1000W 80 PLUS PLATINUM Haswell Ready Full Modular ATX12V & EPS12V SLI and Crossfire Ready Power Supply with C-Link Monitoring and Control

Learn more about the Corsair CP-9020074-NA

Customer Reviews of the Corsair CP-9020074-NA

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIC5BHKST8124