I have this software, i want to use this cage in linux, how can i raid it. and use 3 harddisk as on partions?

I can't answer your linux software question. The RAID cage is only guide rails and connectors to mate with the 3.5" driver.

how can i use this hardware on linux?

The hot swap RAID cage is only a holder for 3.5" hard drives. All that is in the cage is rails to guide the hard drive and connectors. You will need a hardware controller or software to do the Raid. Most motherboard have the RAID controllers built into then. All you should have to do is plug the cables and set your Linux up for RAID.

Out of stock

This item is currently out of stock and it may or may not be restocked.

Out of Stock

Sold by Newegg

Shipped by Newegg

Add to Wish List

Main image of SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 2 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 3 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 4 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 5 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 6 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 7 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 8 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Alt view image 9 of 9 - SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

Shop All SNT Products

SNT SNT-SAC2131B 3x3.5" Hard drive in 2x5.25" Bay Hot Swap SAS/SATA Backplane RAID cage

(10) Write a Review

Support SAS, SATA-I, SATA-II 7-pin SAS connector x 3 (SATA & SAS primary port only)
Support Hot-Swap, RAID 0/1/5
Transfer rate: Up to 3Gbps(SAS & SATA-II) and 1.5Gbps(SATA-l)
All aluminum design w/

Overview

Specs

Reviews (10)

See all Q & A

Any questions? Our AI mode will help you find out quickly.

Try me now

Created with aluminum and supported by an 80mm cooling fan with adjustable speed, The SNT-SAC2131B will stay cool. Safety lock and sensor alarms are here to further protect your storage hardware. LEDs continuously report your hard drive and fan activity. It has hot swap ability and requires no software installations.

The SNT-SAC2131B is a high capacity backplane RAID cage for both SAS and SATA. It is a 3 x 3.5” Hard Drive in 2 x 5.25” bay backplane raid cage with a capacity of 6TB in total. It transfers up to 3Gbps for SAS & SATA-II and 1.5Gbps for SATA-l. It’s designed to support RAID Level 0, 1, 5.

Created with aluminum and supported by an 80mm cooling fan with adjustable speed, The SNT-SAC2131B will stay cool. Safety lock and sensor alarms are here to further protect your storage hardware. LEDs continuously report your hard drive and fan activity. It has hot swap ability and requires no software installations.

ProtectionThe SNT-SAC2131B has super air ventilation and an excellent heatsink. Made with aluminum and an 80mm cooling fan with adjustable speed supporting at the back panel, the system stays cool. In addition, the overheating alarm and safety locks are designed to provide you with extra safety.
Storage CapacityThe SNT-SAC2131B can support up to 6TB in total. Each bay has a capacity up to 2TB. Most 3.5” hard drives will do fine with the SNT-SAC2131B. It is compatible for both SAS and SATA hard drives. With its hot-swap function, you will have an easy time on storing and swapping your data on a daily basis.
Easy SetupThe setup procedure is simple and easy. Simply put the SNT-SAC2131B into your 5.25” slots, connect them with SATA cables, and you’re ready to use this amazing product. You do not need to install any software or drivers.