Question 1

Does this have USB 2.0 output? I want to only use it with a laptop.

Accepted Answer

This card reader is designed to go in a desktop computer where a floppy drive would fit (3.5" bay). The connector on the back is a *female* motherboard usb connector (9 pin) meant to plug into a desktop motherboard. You might be able to find a connector to attach it to a laptop, but I have never seen such a cable and would not recommend one. 
Image search on Google etc for "jusb1" to see what they look like.
You should look for a card reader labeled as "external". This one is labeled "internal" and is really meant to be inside a desktop computer case.

Question 2

does it have a slot for micro sd?

Accepted Answer

Yes it does, the bottom right slot is for Micro SD.

Question 3

Will this drive cause any issues with my Windows 8 Operating system? I currently own a cyber power pc and wanted to know beforehand of if I need to look for specific hardware for windows 8 operating systems.

Accepted Answer

This is a very compatible type of peripheral.  It goes through USB and registers itself with your computer as an external card reader--just like the dozens of other external card readers you might buy anywhere.  I'm using mine just fine with Mac operating system.  You will need to have an unused internal USB hookup--your motherboard probably has 3 or 4 available.  You should also note that the reader is designed to fit in a 3.5" front opening in your case;  my case only has 5.25" openings, so I also bought a 5.25" --> 3.5" plastic older.

Question 4

Is there an external enclosure this can go into? I am not able to find one

Accepted Answer

Years ago when I purchased this it didn't work correctly and got refunded.

Not that I'm aware of, you could somehow Velcro the unit to the top of the tower and run the wire down inside the case as the hookup requires to be plugged into the motherboard of a computer. If I'm understanding correctly an external stand alone setup wouldn't work.  You might be able to get adapter cables to make it work.

Question 5

Is SDXC (unoffically) supported?

Accepted Answer

Not unofficially but rather OFFICIALLY as it is printed over the slot on the front of the reader.

Brand	Rosewill
Model	RCR-IC002

Type	All-in-one
Slots	5
Installation Type	3.5" Internal Drive Bay
Interface	USB 2.0
Compatibility	CF Slot: CF I / CF I Pro / CF I Pro II / CF I Elite Pro / CF I Elite Pro / CF I ultra II / Shoot & Store CF / CF II / CF II Magicstor / CF II Ultimate / CF-Digital Film / CF 3.0 / CF 4.0 / EXTREME III CF / EXTREME CF / ULTRA II CF / HS CF / XS-XS CF / CF ELITE PRO / CF PRO / CF PRO II / IBM MD / HITACHI MD / MAGIC STOR MD SD/MMC Slot: SD / EXTREME SD / EXTREME III SD / ULTRA SD / ULTRA II SD / ULTRA II SD PLUS / ULTRA-X SD / ULTRA SPEED SD / SD PRO / SDHC / SD ELITE PRO / HS SD / MMC / MMC 4.0 / MMC 4.2 / HS MMC / HS RS MMC / RS MMC / RS MMC 4.0 / MMC Mobile / MMC Plus / MMC Micro / DV-MMC / mini SD / HS mini SD MS Slot: MS / MS PRO / MS DUO / MS PRO DUO / MS MG PRO / MS PRO MG HIGH SPEED / MS PRO MG EXTREME III / MS MG / MS MG DUO / MS MG PRO DUO / EXTREME MS PRO / MS SELECT / EXTREME III MS PRO / ULTRA II MS PRO / HS MS MG PRO / HS MS MG PRO DUO / HS MS PRO / HS MS PRO DUO / MS ROM / MS PRO Magic Gate / MS DUO Magic Gate M2/MICRO SD Slot: MICRO SD (T-Flash), MS MICRO (M2) Extreme Digital Slot: Extreme Digital Media Cards / Extreme Digital M type / Extreme Digital H type Requires adapter: HS RS MMC / RS MMC / RS MMC 4.0 / MMC Mobile / MMC Micro / mini SD / HS mini SD
Support - Compact Flash	Yes
Support - Memory Stick	Yes
Support - MMC	Yes
Support - SD	Yes
Dimensions	1.40" x 4.65" x 7.25"

Rosewill RCR-IC002 - 74-in-1 Internal Card Reader with USB 2.0 Ports & Extra Silver Face Plate - Fits 3.5" Drive Bay

Learn more about the Rosewill RCR-IC002

Customer Reviews of the Rosewill RCR-IC002

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16820223109