Question 1

Is this considered a wireless router?

Accepted Answer

Yes, it is a wireless router (also has wired outputs). It takes a cat 5 cable connection to a modem. Setup is pretty easy.

Question 2

Which wireless extenders are compatible/recommended for this router?

Accepted Answer

Thanks for your answers. No, the range of this router is not any better then my old old lynksys router. Especially at 5GHz, at that band the signal fades just a few yards from the router. But event at 2.4GHz the signal is weak just in a next room, let alone the second floor. So, I would like to try an extender, but the choice of those that support 802.11ac is very limited, and I'm not sure if netgear has one.

Question 3

Do you install this with a cd or no?

Accepted Answer

No CD was necessary. I got the configuration software online, from the Netgear site. It's very nice software. There is also a mobile app (iphone/ipad and Android, I believe).

Question 4

How big of an area will this one cover?

Accepted Answer

Covers a considerable area, covers all of my 2600sqf house, but signal is very diminished if lots of walls. I also find myself having to power cycle it quite a lot more than other routers I have used but for range it does seem to have plenty of reach.

Question 5

WHY DOES THIS ROUTER CAUSE MY SONY TV'S TO POWER ON AND OFF REPEATEDLY?

Accepted Answer

No

Question 6

Hi,
Is this compatible to use as an access point?  I have a Netgear N600 WNDR3400 I want to use as the router for this and hardwire them together.  I just don't want the wifi running on the N600 as it is in a bad place for reception.  Thanks!

Accepted Answer

Yes, you can set up this router as an access point (AP) on the same local network as another router.

1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router.
2. Select ADVANCED > Advanced Setup > Wireless AP.
3. Select the Enable Access Point Mode check box.
4. Scroll down and select the check box for the IP address setting that you want to use (Get dynamically from existing router recommended).
5. Click the Apply button

Question 7

Does the Netgear StreamPro AC1200 have VPN capability?  I need to connect VoIP phone from home office to HQ.

Accepted Answer

Yes I have my VoIP modem connect to that.

Question 8

Is this router compatible with DD-WRT, and how about VPN ?

Accepted Answer

Hello, this router is compatible with DD-WRT, although you need a special firmware for it. Best regards

Question 9

With this router (R6100) can you connect a printer to the usb port and share it across network? I have a laser printer w/o wireless or wired network ports. Thanks

Accepted Answer

Yes - I am able to connect the printer to the wireless network also.

Question 10

How do you make the high side the dominant signal?   I have given separate names to each signal and the high signal name never appears on the wifi signal options page.

Accepted Answer

Must go into the netgear interface (username and password are on the back) and enable the 5g setting in the WiFi menu. Stock setting comes with the 5g already on so I am curious how if can to be off. Not a super techy person but I've had my far share of searching in the interface of the 6100. Hope it helps

Brand	NETGEAR
Model	R6100-100PAS

Standards	IEEE 802.11ac, IEEE 802.11a/b/g/n
WiFi Generation	Wi-Fi 5
Wireless Standard	IEEE 802.11a / IEEE 802.11ac / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n
Security	Wi-Fi Protected Access (WPA/WPA2-PSK) Double firewall protection (SPI and NAT firewall) Denial-of-service (DoS) attack prevention
WPA	WPA2
WAN Ports	1 x 10/100M
LAN Ports	4 x 10/100M
Buttons	WPS, Wi-Fi On/Off
Wireless Data Rates	Up to 300+867Mbps
Frequency Band	2.4 GHz / 5 GHz
Antenna	Internal Antenna
Interface	USB 2.0
Wireless Adapter included	No
System Requirements	Microsoft Windows 7, 8, Vista, XP, 2000, Mac OS, UNIX, or Linux Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, or Google Chrome 11.0 browsers or higher Use laptop with 2x2 300 Mbps adapter like Centrino 6205 or 802.11ac adapter like NETGEAR A6200 for maximum performance
Dimensions	180 x 170 x 60 mm (7.08 x 6.69 x 2.36 in)
Weight	322 g (0.71 lb)

NETGEAR R6100-100PAS AC1200 Dual Band R6100 Wi-Fi Router IEEE 802.11ac, IEEE 802.11a/b/g/n

Learn more about the Netgear Inc. R6100-100PAS

Customer Reviews of the Netgear Inc. R6100-100PAS

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16833122555