Five-Port Gigabit PoE Switch
Four-Port Gigabit PoE with Gigabit Uplink
Buffalo's 5-Port Gigabit PoE Switch offers an easy way to extend your business network with simple, cost-effective Gigabit Power-over-Ethernet (PoE) and a dedicated high-speed Gigabit uplink port for connecting to the existing network. Featuring four Gigabit 802.3af PoE ports with up to 15.4W per port and up to 40W of power total on the switch, it provides sufficient power for standard networked devices.
Highlights
This user-friendly design STP-103II upgraded version of STP-103 incorporates a small footprint and drop-in and load paper insertion.
STP-103II equipped USB 2.0 on board can print at a speed of 2.75" (70mm) per second. The BIXOLON STP-103II printer's ability to produce large clear print on 2.2" (58mm) wide paper is found on no other compact printer and it can hold thermal rolls up to 2.3" (60mm) in width.
Product Features
- 4 x Gigabit PoE ports + 1 x Gigabit Uplink port
- IEEE 802.3af Power over Ethernet (PoE) support
- IEEE802.3x Flow Control for full duplex operation, Back Pressure for half-duplex operation
- Max 15.4W power for each POE port
- Max 40W power total on the switch
- Durable metal chassis
- Auto-MDIX provides fast plug and play setup with any Ethernet cable
- Fanless, compact design offers silent and reliable operation
Specifications
| Standard Compliance |
IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3ab (1000BASE-T), IEEE802.3af (PoE) |
| Flow Control |
IEEE802.3x (When operating at full duplex), Back pressure (when operating at half duplex) |
| Number of Ports |
5-port (4 x Gigabit PoE, 1 x Gigabit Non-PoE); All ports support Auto-MDIX |
| Data Transfer Rates |
10/100/1000Mbps |
| Compatible Cables* |
- 1000 BASE-T: Enhanced category 5 or higher UTP cables
- 100 BASE-TX: Category 5 or higher UTP cables
- 10 BASE-T: Category 3 or higher UTP cables
- PoE: Category 5 or higher UTP cables
|
| Connector |
RJ-45 8-pin Connector (shielded) |
| Power |
100 ~ 240VAC, 50/60Hz |
| Power Consumption |
Max 55W |
| PoE Power Supply Function |
Max 15.4W on each port, Max 40W total on the switch |
| Operating Environment |
32-113°F (0-32°C), 10 - 85% (non-condensing) |
| Acquired Standards |
VCCI Class B, FCC Class B, CanadaIC Class B, UL |
| Transmission Speeds |
- 1000Mbps (1000 BASE-T)
- 100Mbps (100 BASE-TX)
- 10Mbps (10 BASE-T)
|
| Switching Method |
Store & Forward |
| Jumbo Frame |
9,216 Bytes (Header 14 Bytes + FCS 4 Bytes inclusive) |
| Transfer Encryption Method |
- 8B1Q4/4D-PAM5 (1000 BASE-T)
- 4B5B/MLT-3 (100 BASE-TX)
- Manchester encoding (10 BASE-T)
|
| Access Method |
CSMA/CD |
| Data Transfer Speeds |
1,488,095 packets per second (1000 BASE-T) |
| (Throughput) |
148,810 packets per second (100 BASE-TX) |
| MAC Address Table |
2,048 (Self-learning) |
| Buffer Memory |
128KB |
| Aging Time |
Approx. 300 seconds |
| Other |
Loop detection Power saving |
| Dimensions (L x W x H) |
6.33 x 7.87 x 1.61 in. |
| Weight |
3.3lbs |
*This unit automatically detects and adjusts for straight or crossover Ethernet cables, so either type of cable may be used. † Site-terminated Ethernet cables may prevent correct connections to the network. Always use preassembled cables. †† This function detects unused ports and reduces the amount of electricity they use.
What's in the Box
- 5-Port Business-Class Switch with 4-Port Gigabit PoE and 1-Port Gigabit Uplink
- AC Cable
- Rubber Feet
- User Manual
- Serial Number
- Warranty Statement
Product Model No.
BSL-POE-G2105U