Specifications: LCD Size: <= 22"
Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, VESA mounting screws
Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, keyboard tray with left/right mouse tray
NOTE: Extra-long cables may be required to span between standing and sitting heights
Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary slightly depending on display thickness. Note that older versions of this product used a narrower crossbar, which accommodated monitors with screens up to 22"
Weight Capacity: Maximum total load on height-adjustment assembly = 31 lbs (14 kg). LCD weight = 6-14 lbs (2.7-6.4 kg) each, keyboard tray = 5 lbs (2.3 kg). For proper operation...
Specifications: Weight Capacity: 50 lbs (22.7 kg)
Maximum CPU Dimensions: 18" x 8.5" (457 x 216 mm)
Minimum CPU Dimensions: 9.4" x 2.6" (239 x 66 mm)
Mounting Options: Directly to wall; under desk; to Ergotron Wall Track (interface bracket required, 97-091); to Ergotron Command Post (interface bracket required, 60-366); to 2" round pole (interface bracket required, 60-131-003); on Ergotron Mobile WorkStand Cart (interface bracket required, 60-131-003); on Ergotron LX Large Display Cart or Neo-Flex Mobile MediaCenter; on Neo-Flex Laptop and LCD Carts; on StyleView SV40/41/SV42 EMR Carts and StyleView SV32 PHD Carts
Specifications: Description: WM Low Profile Wall Mount (silver)
LCD Size: 32" – 65"
Capacity: <= 175 lbs (<= 79 kg)
VESA: MIS-D/E/F
Includes wall plate, two (2) display brackets, hardware fastner kit
Universal Display Attachment: Mounting holes must fit within spacing range below
Horizontal = 100 mm (min.) to 600 mm (max.)
Vertical = 100 mm (min.) to 450 mm (max.)
For displays with horizontal hole pattern of 601–800 mm, order WM, XL version (pt. # 60-602-003)
Mounting Options: Wall plate attaches to vertical wall surfaces. Includes hardware for mounting to wood studs (16" centered studs) or concrete walls
If mounting to wall using 24" centered studs, order WM, XL version (pt. # 60-602-003)
Premium Construction: Composed of extruded aluminum and steel
Profile off the wall = 1.25" (32 mm)
UL certified and listed to ...
Specifications: Color: Black
Includes non-slip pad and clips to hold notebook in place; screws for tray attachment to mount
Note: This is not a stand-alone product. It should be combined with a separately ordered arm, pivot or cart for a complete solution
Weight Capacity: When combined with the LX LCD Arm, the arm will hold notebooks weighing 2.5 – 12 lbs (1.1 – 5.4 kg); when combined with other arms or pivots, contact Ergotron regarding load limitations
Attachment to a separate LCD mount requires a VESA MIS-D 75 x 75 mm hole pattern interface on the mount. Recommended mounts include LX LCD Arms, 200 Series Arms, 100 Series Pivots and Ergotron carts utilizing an LCD monitor pivot
Feature: Installs in three simple steps
Extremely slim profile-just over an inch from the wall
Fits most screens greater than 42" up to 175 lbs (79 kg)
Protect your investment: Integrated security fasteners hold display in place and deter others from removing your display
Includes fasteners for mounting to wood studs or concrete
Specifications: Description: Vertical Small CPU Holder (black)
Includes CPU holder, bumpers
CPU Size Range: 1-3/8" to 3-3/4" (35 to 95 mm) wide; accommodates most small form factor and ultra small form factor CPUs
Weight Capacity: 50.00 lbs.
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory (ordered separately) is recommended
Features: Sturdy and durable housing
Lighted switch indicates power on
Includes mounting hardware for attachment to a variety of surfaces
Easily and securely fastens to Ergotron carts with included brackets
Specifications: Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface/keyboard, one (1) USB extension cable, two (2) cable wraps
NOTE: Extra-long cables are required to span between standing and sitting heights
Optimized for desks that are 30"-36" deep (76-91 cm): on desks shorter than 30", worksurface will extend beyond desktop edge; on desks deeper than 36", worksurface will not extend to desktop edge
Worksurface Dimensions: 29.5" x 21.8" (75 x 55.4 cm)
Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary depending on display thickness
Weight Capacity: Maximum total load on height-adjustment assembly = 25 ...
Specifications: Includes height-adjustment column, desk clamp, LCD pivot, worksurface, large keyboard tray
NOTE: Extra-long cables may be required to span between standing and sitting heights
Weight Capacity: Maximum total load on height-adjustment assembly = 29 lbs (13.2 kg). LCD weight = 16-28 lbs (7.3-12.7 kg), worksurface = 5 lbs (2.3 kg), keyboard tray = 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 29 lbs (13.2 kg)
Lift Range: LCD and keyboard adjust 18" (46 cm) in tandem; LCD adjusts 4.8" (12.2 cm) independently; maximum LCD height adjustment = 22.8" (58 cm). The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5" (13 cm)
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern = 100 ...
Specifications: Screen: 17" - 26"
Capacity: <= 36 lbs.
Rotation: 360°
Product Dimensions: 29.10" x 4.00" x 1.50"
Features: Perfect dual-mounting solution for monitors with screen sizes of 17" to 24"
Attaches to wide variety of mounts using a 50x50 mm or 100x100 mm hole pattern
Robust design ensures many years of service
Conceal and organize cables: Display cables can be neatly routed behind displays
Specification: Includes wall and display brackets, quick-release VESA-CPU mount/power brick bracket, hardware fastener kit
Ideal for 32" and larger displays up to 105 lbs (47.6 kg). Total weight capacity is 115 lbs (52.2 kg): 105 lbs (47.6 kg) for display, 7 lbs (3.2 kg) for CPU, 3 lbs (1.4 kg) for cables and power brick
Tilt: Smooth continuous display tilt range from 0° to 15° forward; Tilt range may be restricted when displays are in portrait mode
Easily rotate display to either a portrait or landscape orientation without removing the display
Mounting Hole Patterns: Horizontal measurement = 200 mm, 300 mm, 400 mm, 440 mm, 500 mm or 600 mm. Vertical measurement = 200 mm or 225 mm-400 mm. With optional 800 mm Accessory Kit (97-489, ordered separately), horizontal measurement can be expanded to 800 mm or 660 mm
Portrait or landscape orientation may be dependant on cont...
Specifications: Part Number: 97-468-202
Description: Vertical Universal CPU Holder (silver)
Includes CPU holder, spacer, bumpers, wall mount fasteners, security nuts and bolts
CPU Size Range: 2" to 8" (50.8 to 203 mm) wide; includes plastic spacer to accommodate most small form factor and ultra small form factor CPUs
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory and bracket kit (60-156), both ordered separately, are recommended
Shipping Dimensions: 10.7"H x 7.7
Frees up work space
Mounting versatility: Installs directly to any sturdy vertical surface or Ergotron Wall Track system
Durable steel construction
Includes fasteners for locking the holder’s width
Accommodates CPUs from 2" to 8" (5 to 20 cm) wide
Handles loads up to ...