Compatibility: Support OS Windows 7 / 8 / 10; Max OSX 10 or the latest version. Note: Note: 1. For Windows OS, only 3 monitors will work at the same time, since Intel Graphic Card only supports 3 monitor display. 2. Mac OS does not support MST, the 3 extenal monitors will display the same content.
Ports Spec: DC Jack, USB-C(upstream), 2 x Displayport, 1 x HDMI, 1 x RJ45, 4-Pole Phone Jack, SD / TF CardReader, 4 x USB3.0-A
Parts: Working Standard: USB-C I/P: USB3.1 Gen2 (data, Video and Upstream Charging) Single DisplayPort: 4K/60Hz max. Single HDMI: 4K/60Hz max. USB-C Port: 5Gbps 3 x USB-A Port: 5Gbps 1 x USBA Port: 5Gbps + BC1.2 Charging RJ45: Gigabit Ethernet CardReader: SDHC /SDXC /TF Phone Jack: Stereo 4pole TRRS Stereo
Wireless Data Rates: WiFi 6GHz frequency band and bandwidth regulatory may vary between countries.
WiFi 7 (802.11be) (6GHz): up to 2882 Mbps
WiFi 7 (802.11be) (5GHz) : up to 2882 Mbps
WiFi 7 (802.11be) (2.4GHz) : up to 688 Mbps
Frequency Band: WiFi 6GHz frequency band and bandwidth regulatory may vary between countries.
6 GHz
5 GHz
2.4 GHz
Specifications: Material: PCB Board. Protocol: M-Key and B+M Key. Input: M.2 SSD Slot, both M-Key and B+M Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Package Contents: Desktop hard drive
SuperSpeed USB-A cable (5Gbps)
AC adapter
Software for device management and backup with password protection
Quick install guide
Specifications: USB 2.0 Full-speed (480Mbps) specification USB HID class specification 1.1 USB Audio device class specification 1.0 USB Type A, 2x 3.5mm stereo output jack, 2 x mono microphone input jack connectors Supports: Windows 98se /ME / 2000 / XP / Server 2003 / Vista/Windows 7 and Windows 8 Linux/ MacOS 10/ System Requirement : Desktop or notebook PC with a USB port, Stereo active speakers or stereo earphone
Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity of up to 6TB.
Backward compatible with USB 2.0/1.1.
DC Power Supply 12V included for 3.5" devices.
On/Off Switch for HDD protection.
Pluy & Play, reliable and stable.
Size: Please Note As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the docking station before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering
Specifications: Interface: USB 3.0
Support Devices: IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives
Drive Size: 2.5" & 3.5" & 5.25"
LED Indicators: 1 x IDE; 1 x SATA; 1 x USB; 1 x Power
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10 (32 or 64 bit)
Mac OS X v10.6 and Up
Linux OS
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification