Specifications: Screw 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboards to a PC chassis
Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis
ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis
Case Dimension...
Specifications: Drive Connectors: 4 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 - USB Type-B (9 pin) USB 3.0 Female
Other Interface(s) : 1 - DB 9-pin Serial Male
Specifications: 2.5in & 3.5in
Drive Connectors 1 - SATA (7 pin; Data) Receptacle
Host Connectors 1 - mSATA (52 pin; Mini SATA) Male
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive
Type and Rate SATA III (6 Gbps)
Specifications: The USBPLATE4 4 port USB 2.0 slot plate adapter converts the USB pins on your motherboard into four USB-A female ports, enabling you to add USB connections to the back of your PC.
Backed by Lifetime Warranty, the USBPLATE4 is designed and constructed for maximum durability, to ensure dependable performance.
Please Note: Check your motherboard’s manual for the USB pinout diagram. The USBPLATE wiring scheme is: Red=Power, Green=Signal, White=Signal, Black=Ground
Connector A: 2 x IDC (10 pin, Motherboard Header) Female
Specifications: Includes 1 x Combined 7+15 pin SATA plus LP4 Power to SATA Cable
Connectors 1x SATA 7 pin Female Connector
Connectors 1x SATA 15 pin Female Connector
Connectors 1x LP4 Male Connector
Specifications: Drive Connectors: 1 - 29 pin SAS SFF-8482 Female Female
Host Connectors: 1 - 22 pin SATA DATA and Power Combo Male Male
1.70" x 7.10" x 5.70"
14.10 oz.
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.