Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
Features: Package Contents:
Micro Pod 3kVA PDU
Power Cord - 10 ft
User manual
Brackets for rack mounting
Number of Output Connections:1
2
4
Output Receptacles:1 x NEMA L5-30R
2 x NEMA 5-15R
4 x NEMA 5-20R
Current:24 A Output Current
Power Rating:3 kVA
Power Rating:3 kVA
Color:Black
Form Factor:Cabinet
Rack-mountable
Product Name:Micro Pod 3kVA PDU
Input Receptacles:NEMA L5-30P
Product Type:PDU
Dimensions: 3.5" Height x 17.0" Width x 3.5" Depth
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA
VESA Compatible: VESA Pattern: 200 x100 to 400 x 400
Feature: Can be dual mounted to 16" studs or single stud
Built-in swivel up to +/-30 degree provides adjustable viewing angles
Supports VESA patterns from 200 x 100 to 400 x 400mm
The I-Shaped Adaptor plate's innovative design helps avoid blocking connections on back of display
Security screws prevent tampering and theft
Flush mountable for in-furniture applications when used in conjunction with in-furniture bracket accessory, ACC-HPF650
IncreLokTM Tilt allows the display to be set at 0 degree, 3.3 degree, 6.6 degree or 10 degree
Lock-out screw prevents unwanted extension
Adjust the force required to pull the display from the closed position using the adjustable tensioned detent