Specifications: RoHS Compliance: Yes
Standard Drive Bays:
5 x 3.5" Hotswap
3 x 5.25" Drives
Hotswap HDD Type: 2.5" & 3.5" SAS I/II/III & SATA I/II/III
Indicators: Power, HDD, fan, and high temperature
Material of Front Bezel: Aluminum
Material of Handle: Aluminum
Material of Main Chassis: Aluminum Design with Conductive Dissipation Grooves
Color of Main Chassis: Black
Package Content: SATA Cable Included (5pcs)
Cooling Fan: 1 x 80mm
Dimensions: 4.96" x 5.75" x 8.25"
Specifications: Hardware
Audio: Yes
Performance
Maximum Digital Resolutions: 1920 x 1080 (1080p) at 60Hz
Supported Resolutions: 1920 x 1080, 1680 x 1050, 1600 x 1200, 1600 x 900, 1440 x 900, 1366 x 768, 1280 x 1024, 1280 x 720, 1024 x 768
Wide Screen Supported: Yes
Indicators
LED Indicators: 1 x status LED
Power
Power Source: USB-Powered
Environmental
Humidity: 0~80% RH
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Physical Characteristics
Enclosure Type: Steel
Product Height: 0.87"
Product Length: 3.15"
Product Width: 2.05"
Product Weight: 5.36 oz.
Package Contents: 1 x EDID emulator
1 x USB power cable
1 x screw driver
4 x foot pads
1 x quick start guide
Specifications: RoHS Compliance: Yes
Standard Drive Bays:
3 x 3.5" Hotswap
2 x 5.25" Drives
Hotswap HDD Type: 2.5" & 3.5" SAS I/II/III & SATA I/II/III
Indicators: Power, HDD, fan, and high temperature
Material of Front Bezel: Aluminum
Material of Handle: Aluminum
Material of Main Chassis: Aluminum Design with Conductive Dissipation Grooves
Color of Front Bezel: Red
Color of Main Chassis: Black
Package Content: SATA Cable Included (3pcs)
Cooling Fan: 1 x 70mm
Dimensions: 3.39" x 5.75" x 8.22"
Resolution Support: Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a);
1080p@100m
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60 Hz (4:2:0);
4096 x 2160 / 3840 x 2160 @ 30 Hz (4:4:4)
Video: Max. Data Rate: 10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock: Up to 340 MHz
Compliance:
HDMI (3D, Deep Color, 4K)
HDCP Compatible
Consumer Electronics Control (CEC)
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA
Specifications: RoHS Compliance: Yes
Standard Drive Bays:
4 x 3.5" Hotswap
3 x 5.25" Drives
Hotswap HDD Type: 2.5" & 3.5" SAS I/II/III & SATA I/II/III
Indicators: Power, HDD, fan, and high temperature
Material of Front Bezel: Aluminum
Material of Handle: Aluminum
Material of Main Chassis: Aluminum Design with Conductive Dissipation Grooves
Color of Front Bezel: Blue
Color of Main Chassis: Black
Package Content: SATA Cable Included (4pcs)
Cooling Fan: 1 x 80mm
Dimensions: 4.96" x 5.75" x 8.03"
Package Contents: VGA Extender Transmitter
VGA Extender Receiver
VGA Cable
3.5mm Cable
3.5mm to IR Receiver Cable
3.5mm to IR Blaster Emitter Cable
RS-232 to 3.5mm Adapter Cable
AC Power Adapter (x2) (5V / 2A)
User Manual