Compatibility: Tripp Lite UPS system with compatible accessory slot (please verify compatibility with your UPS before ordering)
Ethernet network with TCP/IP protocol (ports 3664 and 3665 must be open on your firewall)
SNMP-based network management software, web browser (Chrome, Firefox or Safari) and/or VT-100 Telnet and/or SSH client
Package Contents: WEBCARDLXMINI Web Management Accessory Card
USB Micro-B to USB-A cable
Faceplates
Owner's manual
Specifications: Output
Output Power Capacity: 10 kWatts / 10 kVA
Max Configurable Power: 10 kWatts / 10 kVA
Nominal Output Voltage: 208 V,208 V 3PH
Efficiency at Full Load: 92.00%
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 57 - 63Hz for 60Hz nominal
Crest Factor: Unlimited
Waveform Type: Sine wave
Output Connections: (1) Hard Wire 5-wire (3PH + N + G)
Input
Nominal Input Voltage: 208 V,208 V 3PH
Input Frequency: 60Hz +/- 3Hz
Input Connections: Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations: 177 - 239 (208 V) V
Communications & Management
Interface Port(s): RJ-45 10 Base-T ethernet for web / SNMP / Telnet management, SmartSlot
Audible Alarm: Alarm when on battery / distinctive low battery alarm / configurable delays
Approvals: cUL Listed, FCC Part 15 Class A, ISO 140...
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)
Specifications: CPU: 16-bit micro control
Memory: 2 MB Static RAM / 2 MB Flash ROM
Serial Communication: Two Asynchronous serial ports
LAN Chip: Auto-Sense 10/100 Mbps Fast Ethernet controller
Network Connection: 10/100 TX RJ-45 jack connector
Network Protocol: SNMP over UDP/IP, HTTP over TCP/IP, ARP, TFTP, and ICMP
Supported MIB: Environmental Rack Monitor (ERM) MIB
Operating Temperature: 0-40ºC (32-104ºF)
Operating Humidity: 10-80%, noncondensing
Power Input: 12 Vdc unregulated
Power Consumption: 3.0 Watts Maximum
EMC Statements: Class B: FCC Part 15, ICES-003, CE
Specifications: Temperature readings: Fahrenheit, Celsius
Temperature accuracy: 14°F to 158°F +/- 0.9°F; -10°C to 70°C +/- 0.5°C
Humidity accuracy: 10-90 RH ± 2%
Voltage: 12V (from RMCARD)
Input dry contact: 4
Connection port & cable: RJ45 Ethernet port x 2, 10 ft. cable, Daisy Chain x 8 Max