Specifications: Toolless, vertical cable management accessory that allows for quick installation and takes up zero U of space within the rack. It helps to eliminate cable stress and organize the cable layout within the rear channels of the NetShelter enclosure.
Specifications: Output
Maximum Total Current Draw per Phase: 10A
Output Connections: (1) IEC 320 C13 IEC 320 C13
Cord Length: 0.61 meters
Input
Input Connections: IEC-320 C14
Cord Length: 0.61 meters
Number of Power Cords: 6
Maximum Line Current per phase: 10A
Maximum Input Current per phase: 10A
Specifications: Temperature readings: Fahrenheit, Celsius
Temperature accuracy: 14°F to 158°F +/- 0.9°F; -10°C to 70°C +/- 0.5°C
Humidity accuracy: 10-90 RH ± 2%
Voltage: 12V (from RMCARD)
Input dry contact: 4
Connection port & cable: RJ45 Ethernet port x 2, 10 ft. cable, Daisy Chain x 8 Max
Compatibility: Compatible with these UPS Systems - OMNIVS1500XL, OMNIVSINT1500XL, SMART750RMXL2U, SMART750XLA, SU750RTXL2U, SU750RTXLCD2U, SU750XL, SU1000RTXL2UA, SU1000RTXLCD2U, SU1000XLA, SU1000XLCD, SUINT1000RTXL2UA and other Tripp Lite UPS systems that specify the use of this battery pack.
Specifications: DC System Voltage (VDC): 24
UPS Connection : Attached cable with red/black 75 amp male DC connector
Compatibility: UPS Systems -OMNIVS1500XL,OMNIVSINT1500XL, SU750XL, SU750RTXL2U, SU1000XLa, SU1000RTXL2Ua, SMART750RMXL2U, and other Tripp Lite UPS systems that specify the use of this battery pack.
Compatibility: Tripp Lite UPS system with compatible accessory slot (please verify compatibility with your UPS before ordering)
Ethernet network with TCP/IP protocol (ports 3664 and 3665 must be open on your firewall)
SNMP-based network management software, web browser (Chrome, Firefox or Safari) and/or VT-100 Telnet and/or SSH client
Package Contents: WEBCARDLXMINI Web Management Accessory Card
USB Micro-B to USB-A cable
Faceplates
Owner's manual
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)
Specifications: General Battery:
An RBC is a Replacement Battery Cartridge for an Uninterruptible Power Supply (UPS). A UPS is a battery backup power source. 12 volt Batteries.
2 maintenance-free sealed lead-acid batteries (12V 7ah).
Maintenance Free Sealed Lead Acid leak proof batteries.
RBC32 Battery Assembly Technical:
Operating Environment: 0 - 40 deg. C.
Storage Temperature: -15 - 45 deg. C.
Meets or exceeds the original UPS manufacturer's specifications.
Specifications: Output
Maximum Total Current Draw per Phase: 16A
Output Connections: (1) IEC 320 C19
Input
Input Connections: IEC 309 16A 2P+E
Cord Length: 3 meters
Maximum Line Current per phase: 16A
Maximum Input Current per phase: 16A