Your Browsing History
Meet Your Seller
MMDVM Duplex Hotspot Module Dual V1.5.2 with OLED Display, USB & Ethernet Port, Supports P25 DMR YSF NXDN, DMR Slot 1 & Slot 2 for Raspberry Pi 3b
- [Wide Compatibility] Supports DMR, P25, D-Star, YSF, NXDN, and POCSAG, allowing different digital radio modes to communicate seamlessly. Works with Raspberry Pi models, including Pi Zero.
- [Upgraded Connectivity] Features both WiFi & Ethernet support. The Raspberry Pi Model 2B allows direct wired connection, ensuring a stable network, while the built-in WiFi module supports wireless operation.
- [Optimized Frequency & Performance] Operates on UHF 430-450MHz, best suited for amateur radio bands. Built with a 32-bit ARM processor for high performance and up to 10mW RF power output.
- [Pre-Configured & Easy Setup] Preloaded Pi-Star firmware on an 8GB TF card, preset with OLED Type 3, STM32 GPIO, and basic frequency settings. Simply adjust callsign, DMR ID, and security settings for use.
- [Enhanced Design & Accessories] Comes with a dual-color OLED screen (yellow/blue) for status display, an acrylic shell for protection, a 433MHz UHF antenna, and onboard LEDs to indicate real-time op
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Product Description: The MMDVM Duplex Hotspot Module V 1.5. 2 is an advanced digital voice modem designed to support various amateur radio modes, including DMR, P25, YSF, D-Star, NXDN, and POCSAG. This hotspot module ensures seamless cross-mode communication with its dual-slot support (DMR Slot 1 + Slot 2) and full-duplex capability using two onboard ADF7021 transceivers. Preloaded & Easy SetupFor convenience, the Pi-Star firmware is preloaded on an 8GB TF card, with
most settings configured: Simplex Mode pre-set for ease of use. OLED Display Type 3 and STM32 GPIO Modem pre-selected. 433.550MH z TX frequency set by default (adjustable as needed). Connectivity & Network Dual connectivity options: Supports WiFi for wireless operation and Ethernet for a more stable wired connection. For first-time setup, simply connect via Ethernet cable to configure WiFi easily.
Frequency & Transmission UHF: 430-450MHz, optimized for amateur radio bands.
VHF: 144-148MHz, 219-225MHz also supported. Supports DUPLEX & SIMPLEX modes, allowing dual time-slot DMR operation. Power & Accessories Powered via DC 5V USB, compatible with mobile chargers, power banks, laptops, or computers. Comes with a 433MHz UHF antenna for better signal reception. Features an acrylic shell for protection and clear visibility of status LEDs. Onboard LED indicators display TX, RX, PTT, and Mode status. Upgrade &
Maintenance Latest Firmware: V 1.5. 2 (Upgradeable to V 1.6. 1). Upgrade via
Pi-Star SSH (user: pi-star, pass: raspberry). Supports STM32-DVM/MMDVM_HS-Raspberry Pi Hat (GPIO) modem selection.
Package Includes: 1. Duplex Hotspot x1 (With Raspbery P Model 2B assembled) 2. OLED display x1 (installed on board) 3. 8G TFT card x14. Wireless wifi module x15. Acrylic Shell x1 (assembled) 6. 433Mhz UHF Antenna x27. Usb Cable x18. User Manual
most settings configured: Simplex Mode pre-set for ease of use. OLED Display Type 3 and STM32 GPIO Modem pre-selected. 433.550MH z TX frequency set by default (adjustable as needed). Connectivity & Network Dual connectivity options: Supports WiFi for wireless operation and Ethernet for a more stable wired connection. For first-time setup, simply connect via Ethernet cable to configure WiFi easily.
Frequency & Transmission UHF: 430-450MHz, optimized for amateur radio bands.
VHF: 144-148MHz, 219-225MHz also supported. Supports DUPLEX & SIMPLEX modes, allowing dual time-slot DMR operation. Power & Accessories Powered via DC 5V USB, compatible with mobile chargers, power banks, laptops, or computers. Comes with a 433MHz UHF antenna for better signal reception. Features an acrylic shell for protection and clear visibility of status LEDs. Onboard LED indicators display TX, RX, PTT, and Mode status. Upgrade &
Maintenance Latest Firmware: V 1.5. 2 (Upgradeable to V 1.6. 1). Upgrade via
Pi-Star SSH (user: pi-star, pass: raspberry). Supports STM32-DVM/MMDVM_HS-Raspberry Pi Hat (GPIO) modem selection.
Package Includes: 1. Duplex Hotspot x1 (With Raspbery P Model 2B assembled) 2. OLED display x1 (installed on board) 3. 8G TFT card x14. Wireless wifi module x15. Acrylic Shell x1 (assembled) 6. 433Mhz UHF Antenna x27. Usb Cable x18. User Manual
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by HAIZHILANSTORE Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...