Specifications: HARDWARE FEATURES
DDM: Yes
SFP-MSA: Yes
Hot Swappable: Yes
MEDIA CONVERTER & MODULE
Standards and Protocols: IEEE 802.3z, TCP/IP
Wave Length: TX 1550 nm, RX 1310 nm
Power Supply: 3.3 V
Safety & Emission: FCC, CE
Cabel: Single-Mode Fiber
Fiber Type: 9/125 µm Single-Mode
Max. Cable Length: 2 KM
Data Rate: 1.25 Gbps
Port Type: LC Simplex
Environment:
- Operating Temperature: 0-70 °C (32-158 °F)
- Storage Temperature: -40-85 °C ( -40-185 °F)
- Operating Humidity: 10-90% RH, Non-Condensing
- Storage Humidity: 5-90% RH, Non-Condensing
Features: Designed for on-site gigabit fiber communication
Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
Bidirectional WDM communication on a single fiber
Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
Supports Digital Diagnostic Monitoring (DDM)
Hot-swappable module desi...
Specifications: HARDWARE FEATURES
DDM: Yes
SFP-MSA: Yes
Hot Swappable: Yes
MEDIA CONVERTER & MODULE
Standards and Protocols: IEEE 802.3z, TCP/IP
Wave Length: TX 1310 nm, RX 1550 nm
Power Supply: 3.3 V
Safety & Emission: FCC, CE
Cabel: Single-Mode Fiber
Fiber Type: 9/125 µm Single-Mode
Max. Cable Length: 2 KM
Data Rate: 1.25 Gbps
Port Type: LC Simplex
Environment:
- Operating Temperature: 0-70 °C (32-158 °F)
- Storage Temperature: -40-85 °C ( -40-185 °F)
- Operating Humidity: 10-90% RH, Non-Condensing
- Storage Humidity: 5-90% RH, Non-Condensing
Features: Designed for on-site gigabit fiber communication
Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
Bidirectional WDM communication on a single fiber
Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
Supports Digital Diagnostic Monitoring (DDM)
Hot-swappable module desi...
Specifications: Adjusts from 12.75" to 21" / 323.8mm to 533.4mm
Features: Network switches, load balancers, and routers typically sit at the top and back portion of the rack. This placement makes it difficult for cold air to travel from the front of the rack to the air intakes of the network switch equipment, increasing chances of failure over time. SwitchAir helps prevent failure by channeling cool air from the front of the rack to the air intakes regardless of where the equipment is mounted.
Benefits
- Reduces the chance of network switches overheating by directing cool air to device intakes.
- Reduces the likelihood of premature equipment failure due to high intake temperatures.
- Improves equipment efficiency by providing network equipment with the same cold aisle temperature as other devices in the rack.
- Decreases wrap around hot airflow from the hot aisl...