7.8inch E-Ink Display HAT Black/White Two Color E-Paper Screen Module for Raspberry Pi, Nucleo 1872×1404 IT8951 Controller USB/SPI/I80/I2C Interface Supports Partial Refresh

Overview This is an E-Ink display HAT for Raspberry Pi, 7.8 inch, 1872×1404 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface, supports partial refresh. Due to the advantages like low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as ebook reader, e-ink display, industrial instruments, and so on. Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards USB/SPI/I80/I2C interface, for connecting with host boards like RPi/Nucleo, etc.

Comes with development resources and manual (examples for Raspberry Pi/STM32)

Specifications

Operating voltage: 5V
Interface: USB/SPI/I80/I2C
Outline dimension: 173.8 mm × 127.6 mm × 0.78 mm
Display size: 158.184 mm × 118.638 mm
Dot pitch: 0.0845 mm × 0.0845 mm
Resolution: 1872 × 1404
Display color: black, white
Gray scale: 2-16 (1-4 bit)
Full refresh time: 450ms
Total refresh power: 1.2W (typ. )
Total standby power: 0.1W (typ. )
Viewing angle: >170° Package Content 1. 7.8 inch e-Paper x1 2. e-Paper IT8951 Driver HAT (B) x1 3. 7.8 inch e-Paper Adapter x1 4. 33PIN FFC (same side contact) x1 5. USB type A plug to micro B plug cable x2 6. PH 2.0 20cm 8Pin x1 7. RPi screws pack (2pcs) x1