Turntables & Cartridges

• Model #: AT6028

• Model #: ATN91R

• Type: Cleaning Kits
• Color: Black
• Model #: AT6013A

• Brand: Audio Technica
• Type: Turntable
• Model #: ATN3600LE

• Model #: ATN3600LC

• Brand: Audio-Technica
• Color: Black
• Accessory Type: Cartridge Alignment Protractor
• Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
• Model #: AT-CAP1

• Model #: AT-LPA2

• Model #: ATN95EX

• Brand: Audio-Technica
• Color: Silver
• Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole Easy to grip with fingers Approx. 450 g (15.9 oz) Fits spindles up to 21 mm long Works with a wide variety of turntables, including most Audio-Technica step-up and premium models* Made in Japan *Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
• Model #: AT628A

• Brand: Audio-Technica
• Color: Orange/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT615A

• Model #: AT-XP3/H

• Accessory Type: Other
• Weight: 0.04
• Model #: ATN-XP5

• Model #: AT-HS1

Limited time offer, ends 08/24

• Model #: 885819149016

Limited time offer, ends 08/24

• Model #: 425333625605

Limited time offer, ends 08/24

• Model #: 378592885221

Limited time offer, ends 08/24

• Model #: 637242791368

Limited time offer, ends 08/24

• Model #: 236488600030