DIY Cooling

Limited time offer, ends 08/31

• Model #: 11-001-360

• Type: CPU Block
• Model #: RGV-LAN-O11MINI-P-K-NE

• Type: CPU Block
• Model #: RGV-LAN-011-LI-P

Limited time offer, ends 08/08

• Model #: C00F-112401

Limited time offer, ends 08/08

• Model #: C0FE-112413

Limited time offer, ends 08/30

• Model #: C00F-112406

• Model #: 034141471280

• Model #: DEETB0D4ZCYTYH

• Model #: DEETB0D4ZFJP7D

• Model #: DEETB0D4ZGPFSF

• Model #: DF-12025-ARGB-251

• Model #: 612521369797

Limited time offer, ends 08/08

• Model #: C00F-112410

• Model #: CLAWB0FHJ2SVTK

Limited time offer, ends 08/08

• Model #: C0FE-112414

Limited time offer, ends 08/08

• Model #: C00F-112426

Limited time offer, ends 08/08

• Model #: C0FE-112412

Limited time offer, ends 08/08

• Model #: C00F-112407

• Model #: 612521350498

• Model #: C0FE-112411

• Model #: 1-Com-Cooler3089

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

Limited time offer, ends 08/31

• Model #: 11-001-362-6CM

Limited time offer, ends 08/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: SXD8025M12B 3pin

• Model #: 80-Water-Cooling0305

• Model #: 1-CaseFans0580

• Brand: Alphacool
• Model: 1023694
• Part Number: 1023694
• Color: Silver
• Model #: 1023694

• Model #: 1-Com-Cooler1585

• Model #: 27-Com-Cooler1585

Limited time offer, ends 08/16

• Model #: 1-Com-Cooler0997

• Model #: 1-CaseFans0133

Limited time offer, ends 08/16

• Model #: 1-Com-Cooler1325

• Model #: 1-Water-Cooling0397

• Model #: 1-Com-Cooler2673