DIY Cooling

• Model #: BP-TBE90RMLA14

• Model #: BP-WTP-C89-4P

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Brand: Alphacool
• Model: 4250197147330
• Part Number: 1026327
• Block Material: Copper
• Model #: 4250197147330

• Type: CPU Block
• Model #: R-SL-W12-TXS

Limited time offer, ends 08/31

• Model #: 11-001-025

• Model #: BP-E90DML16-2P

• Brand: Watercool
• Model: 1013023
• Part Number: WAT-0014
• Type: Reservoir
• Model #: 1013023

• Model #: BP-MBE90RML16-2P

• Type: Liquid Cooling System
• Model #: BP-MVVFRGIG14-SLBK

• Model #: BP-E90DML14-2P

• Brand: Alphacool
• Model: 4250197138369
• Part Number: 1024430
• Color: Black
• Model #: 4250197138369

• Model #: BP-MBE90DML-4P

• Model #: BP-DW45R-4P

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Model #: BP-DWE90DML-4P

• Brand: Thermal Grizzly
• Model: TG-KS-75-72
• Part Number: TG-KS-75-72
• Color: Black
• Model #: TG-KS-75-72

• Model #: BP-DW90R-4P

• Model #: BP-DWWP-C39-4P

Limited time offer, ends 08/31

• Model #: 11-001-129

Limited time offer, ends 08/31

• Model #: 11-001-024

• Brand: Watercool
• Model: 1013034
• Part Number: WAT-0017
• Type: Reservoir
• Model #: 1013034

• Brand: Alphacool
• Model: RNAB08NWZ5H8K
• Color: White
• Part Number: 1019557
• Model #: RNAB08NWZ5H8K

Limited time offer, ends 08/31

• Model #: 11-001-195

• Model #: BP-MBWP-C04-2P

• Model #: BP-DWWP-C04-2P

(19)

• Type: Fittings
• Color: Green
• Tube Dim.: Dimension: 26 (D) x 21 (H) (mm) Applicable: OD : 16 mm Screw Thread: G 1/4 Note: PETG Tube to G1/4
• Tube Material: CU + AL
• Model #: CL-W212-CU00GR-B

• Model #: BP-DWRG-2P

• Model #: BP-WTP-C40-4P

• Model #: BP-DWPRE-06-4P

• Model #: BP-DWWP-C40-4P

• Model #: BP-BSWP-C47-4P

• Type: Reservoir
• Model #: BP-WTHCON

• Brand: Thermal Grizzly
• Model: TG-MP8-100-100-05-2R
• Part Number: TG-MP8-100-100-05-2R
• Color: Pink
• Model #: TG-MP8-100-100-05-2R

• Model #: BP-DWTB-2P

• Model #: BP-WTP-C47-4P