Specifications: Color: Black
Mounting Surface Thickness: Desk Clamp: Table Thickness up to 1.3 in. (33 mm)
Height Adjustment: No
Maximum Display Size: 32in
Maximum Height: 5.1 in [130 mm]
Weight Capacity (Per Display): 44.2 lb [20 kg]
Included in Package:
1 x Monitor Platform
2 x Desk Clamp Assemblies
1 x Hex Key
4 x Screws
4 x Washers
1 x Quick Start Guide
Specifications: # of Displays Supported: 1
Articulating: No
Cable Management: Yes
Mounting Options: Wall-Mount
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Height Adjustment: No
Maximum Arm Extension: 10.2 in [260 mm]
Maximum Display Size: 30in
Minimum Display Size: 13"
Weight Capacity (Per Display): 30.9 lb [14 kg]
Swivel / Pivot:
+180°/-180° at the wall
360° at the elbow
Included in Package:
1 x Wall Mount
1 x Swivel Arm
1 x Monitor Mount
1 x M3 Hex Key
4 x Thumb Screws
2 x Wall Plugs
2 x Mounting Screws
1 x User Manual
Specifications: CMS Speed-Connect Fixed Extension Column can be used with any 1 1/2" NPT accessory to lower projector to desired height.
Length: 6" (152.4 mm)
Color: Black (also available in Silver or White)
Weight Capacity: 500 lbs (226.8 kg)
Specifications: Weight Capacity: Total load on height-adjustment assembly = 50 lbs (22 kg). Includes contents of Worksurface, Cable Storage Box and LCD Pivots. LCD Pivot capacity = 6–14 lbs (2.7–6.4 kg) per display, 12–28 lbs (5.4–12.7 kg) for both displays
Mounting Standards: VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm)
Displays can be mounted on cart in 5 different height positions
Install displays at 3.5° or 8.5° upward angle for optimized viewing conditions. Displays are not tilt adjustable
CPUs attach safely to rear of cart with CPU Holder: Adjusts from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm)
CPU Holder capacity: 40 lbs (18 kg)
Cable Storage Box and space within the center column can conceal and route cords, wiring and power bricks
Barcode scanner holder provides easy access to ...
Specifications: LCD Size: < 24"
Weight Capacity: 6–16 lbs (2.7–7.2 kg)
Lift: 5", 13 cm
Tilt: 30°
Pan: 270°
Rotation: 90° P/L
VESA: MIS-D
Description: Neo-Flex LCD Desk Stand (black & silver)
Meets UL Specification 1678 Tip Test when loaded with all weights of LCDs
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Screen Sizes: 17” to 32”
Weight Allowance: 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg) per arm
VESA Sizes: 75×75 and 100×100
Height adjustment: 9.5” (24 cm) of fingertip height adjustment
Tilt: ±25°
Reach: 23.3” (59.3 cm) depending on screen size and orientation
Monitor Rotation: 360°
Integrated cable management
Includes: Assembly manual; All mounting hardware
Material: Aluminum construction with durable painted finish
Specifications: LCD Size: = 24"
Weight Capacity: <= 25 lbs(= 11.3 kg)
Tilt: 180°
Pan: 360°
Rotation: 360° P/L
VESA: MIS-D
Includes 200 wall mount pivot, wall mount bracket, 2 extensions, VESA mounting screws
If mounting a laptop, also order the LX Notebook Tray (50-193-200)
Weight Capacity: 25 lbs (11.3 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Extends up to 23.8" (60.5 cm) from the wall and retracts to within 5.8" (14.8 cm), excluding depth of monitor
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: LCD Size: Up to 24"(Up to 61 cm)
Weight Capacity: Up to 23 lbs(Up to 10.35 kg)
Tilt: 180°
Pan: 180°
Rotation: 360° P/L
VESA: MIS-D
DS100 Dual-Monitor Desk Stand, Vertical (black)
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 28" x 16" x 7.5" (711 x 406 x 191 mm)
Shipping Weight: 16 lbs (7.3 kg)
Specifications: Includes Includes: 10" and 34" Wall Tracks with two black track covers, LX Wall Mount LCD Arm, LX Keyboard Arm, wrist rest, mouse pad, mouse holder, Small CPU Holder, two 10" Cable Channels, mounting kits for hollow-wall and wall-stud installation
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Polished aluminum construction offers greater durability and enhanced aesthetics
Snap-fit cap secures interface of arms to extensions for greater stability
Weight Capacity: display = 7-25 lbs (3.2-11.3 kg); keyboard = 5 lbs (2.2 kg); CPU = 50 lbs (22 kg). With monitors greater than 20 lbs (9.1 kg) in weight, the vertical range of motion may be reduced up to 4.5" (11 cm) for a total height range of 8.5" (22 cm)
Mounting Standards: VESA FDMI MIS...
Specifications: Material: Steel
Dimensions: 4.25" Height x 3" Width x 7.50" Depth
Color: Black (also available in white)
Weight Capacity: 500 lbs (227 kg)
Package Contents:
CMA Angled Ceiling Plate
2 x 3/8" Washer
1 x 5/32" Hex Key
1 x Coupler Assembly
1 x (½"-13) Nylock Nut
1 x Cathedral Ceiling Plate
1 x (½"-13 X 4") Hex Head Bolt
1 x (5/16"-18 X 3/8") Set Screw
2 x (3/8"-16 X 5/8") Hex Machine Screw
Specifications: Maximum Display Size Supported: 27 in
Load: 40 lb (18.2 kg)
Form Factor: Desktop
Lift Range: 22-33 cm
Tilt Range: 70 degrees backward / 5 degrees forward
VESA Mount Standard: 100 mm, 75 mm
Display Rotation: 360 degrees
Desk Clamp: 0.4 - 2.6 in (10 - 66 mm)