Specifications: Wire Size: 30 Gauge
Latch Style: Pull Type
Directional: No
Connector: SFF-8088 to SFF-8087
Impedance: 100 Ohms
Compliant: SAS-2.1
Type: Passive
Transfer Rate: 6 Gb/s
Dimensions (WxHxD) 0.30" x 0.20" x 39.37"
8 mm x 5 mm x 1,000 mm
Specifications: Wire Size: 28 Gauge
Latch Style: Pull Type
Directional: No
Connector: SFF-8088
Impedance: 100 Ohms
Compliant: SAS-2.1
Type: Passive
Transfer Rate: 6 Gb/s
Dimensions (WxHxD) 0.30" x 0.20" x 39.37"
8 mm x 5 mm x 1,000 mm
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA
Specifications: Wire Size: 30 Gauge
Latch Style: Press Type
Directional: No
Connector: SFF-8087
Impedance: 100 Ohms
Compliant: SAS-2.1
Type: Passive
Transfer Rate: 6 Gb/s
Dimensions (WxHxD) 0.30" x 0.20" x 29.53"
8 mm x 5 mm x 750 mm
Specifications: Wire Size: 30 Gauge
Latch Style: Pull Type
Directional: Yes, SFF-8088 to host
Connector: SFF-8088 to eSATA
Impedance: 100 Ohms
Compliant: SAS-2.1
Type: Passive
Transfer Rate: 6 Gb/s
Dimensions (WxHxD) 0.30" x 0.20" x 39.37"
8 mm x 5 mm x 1,000 mm