Components & Storage

• Model #: CLAWB0DZXP8S5L

• Model #: 508922720551

• Model #: GENXB0FH2G2KML

• Model #: Lan363399485708991

• Model #: 994255005708

• Model #: 680952983967

• Model #: 472744060792

• Model #: 9158154879223

• Model #: 9306201282322

• Model #: 356571546080

• Model #: 531028601028

• Specifications: Pro3000 Analog Toner Specifications User interface: Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency: 1000 Hz nominal Alternating Frequency: 1000/1500 Hz nominal Over Voltage Protection: 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode: 8 dbm into 600 ohms Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C Case dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...
• Model #: 26100900

• Color: Black
• Specifications: Interfaces Serial 4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments); Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd; Flow Control: None (default) RTS/CTS Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
• Dimensions: 1.65" x 2.98" x 5.12"...
• Model #: VK224

• Color: Black
• Specifications: Interfaces Relay 8 normally open relays (8 x 2-pole terminal block) Contact Rating: Max 24 VDC, 2A Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility) Output 12 VDC, 300 mA
• Dimensions: 1.65" x 2.98" x 7.87"
• Weight: 1.43 lbs.
• Model #: VK248

OUT OF STOCK

• Model #: 426326162930KUKAONE

OUT OF STOCK

• Series: SmartSockets
• EMI/RFI Noise Filter: EMI/RFI noise filtration, right-angle plug and recessed on/off switch
• Color: Gray
• Unit Dimensions: 13.88" x 7.63" x 2.50"
• Model #: K62691NA