Components & Storage

• Model #: CLAWB0FKL77GN8

• Model #: CLAWB0FKL467HP

• Model #: CLAWB0FKL42CKG

• Model #: CLAWB0FKL6VCH7

• Model #: CLAWB0FKL3PMJ4

• Model #: 472744058010

• Model #: 477915934766

• Model #: CLAWB0FKKXZGPL

• Model #: AN-800

Limited time offer, ends 01/27

• Model #: baekhyun-712

• Model #: ZXH-H9625

• Model #: U1IO1Q-2806

• Model #: U1IO1Q-2951

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: 500 ~ 1400 R.P.M
• Air Flow: 63.19 CFM
• Model #: fb8-101444000332206

• Type: Case Fan
• Bearing Type: Hydro Bearing
• RPM: 500 - 1400 RPM
• Air Flow: 63.19 CFM
• Model #: C CL-F056-PL14SW-A

• Model #: OB07CB6F5HG

• Model #: 7d9-364645000264104

• Model #: ee3-198452000252065

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: 1500 RPM (1000 RPM w/ LNC Cable)
• Air Flow: 40.6 CFM / 68.97 m3/h
• Model #: L-F038-PL12OR-A

• Model #: TG-P-A-100-R

• Model #: YQC-TI9641

Limited time offer, ends 01/20

• Model #: 6909786785

• Model #: 628463406858

• Model #: 443494331050

• Model #: SOYE450742272010WEI

• Model #: MB0CDC5DH2B

• Model #: 881047243687ABC

• Model #: 883825618786ABC

• Model #: TP-VP05-B

• Model #: 6908110148

• Volume / Net Weight: 5.0g
• Thermal Conductivity: 11.0 W/mK
• Long Term Operating Temperature: -150 to 130 C
• Specifications: Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
• Model #: TG-K-015-R

• Model #: 1-CPUThermal0632

• Model #: 1-CPUThermal1626

• Weight: Thermal Pads
• Model #: SET

• Model #: a21032600ux0304

Limited time offer, ends 01/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393