Net Weight 85 Grams Fast Curing Aluminum Soft Tube Packaging White 9980 Thermal Adhesive Cement Glue Silicone for LED VGA ST85

9980 Thermal Conductive Adhesive:Color : White

Shelf Life: 6 Months

Surface Dry: 5 Minutes

Bond Strength: 1.8 MPA

Specific Gravity: 2.4 G/Cc

Packaging: Aluminum Tube

Thermal Conductivity: 0.671 W/M-K

Operating Temperature: -4~482 Degrees Fahrenheit

Note:1. After being bonded, it is difficult to be separated. Please use in caution.

2. Please tighten the upper cap after using, avoiding curing.

3. The curing speed of 9980 thermal conductive adhesive is related with environmental temperature, humidity and the thickness that smeared. The higher of the temperature and humidity value, and the thinner you smear (recommend the thickness of A4 paper), the curing time will be much shorter. Conversely, the time will be longer.

Real Shot Product Picture:

Product features:Accord with RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.

Working principle:Filling the gap between heating element and the cooling device; Increasing the contact area so as to achieve the soundest thermal conductivity effect.

Method of use:It's normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).

Warm notice:Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary.

Storage:Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.