Connector Detail: Connector A: 1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
Connector B: 1 x HDMI (19 pin) Female Output
Note: Your USB-C port must support DisplayPort over USB-C (DP Alt mode) in order to work with this adapter.
Specifications: Audio: Yes
AV Input: HDMI
Cabling: Cat 5 UTP or better
Daisy-Chain: No
Ports: 1
Audio Specifications: Supports Dolby TrueHD, DTS-HD MA
IR Interface: Bi-directional, 38Khz / +/-10° / 5M
Max Distance: 50 m / 165 ft
Maximum Data Transfer Rate : HDMI - 3.4Gbps, RS232 - 115200bps baud
Maximum Digital Resolutions: 1080p @ 60Hz, 48-bit
Wide Screen Supported: Yes
Specifications: Active or Passive Adapter: Active
AV Input: HDMI
AV Output: Audio RCA, Composite
Industry Standards: Standard HDMI, DVI 1.0
Audio Specifications:
Input - LPCM 2Ch, 48kHz
Output - Stereo L/R
Supported Resolutions:
Input
TV - 1080p, 720p, 576p, 480p @ 60Hz
PC - 1920x1080, 1280x800, 1280x768, 1224x768, 800x600, 640x480 @ 60Hz
Output: 480i, 576p
Input Current: 0.4 A
Input Voltage: 100 ~ 240 AC
Output Current: 2000 mA
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included
Type: Ethernet Splitter 1 to 2 RJ45 Network Adapter
Changer Type: Gigabit RJ45 Ethernet Splitter 1 to 2
Specifications: Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection.
Ethernet Splitter 1 to 2: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dual female port LAN ethernet cable, the speed of two cable group (1 and 2) can reach 1000Mbps. And the signal transmission of two cable groups will not int...
Type: Ethernet Splitter 1 to 3 RJ45 Network Adapter
Changer Type: Gigabit RJ45 Ethernet Splitter 1 to 3
Specifications: Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection.
Ethernet Splitter 1 to 3: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 3 ways dual female port LAN ethernet cable, the speed of three cable group (1,2 and 3) can reach 1000Mbps. And the signal transmission of two cable groups will not...