Specifications: The TS®30 Test Set top features include:
High impedance monitor mode
Automatic regulation of speech levels
Tone and pulse operation
Last number redial in tone and pulse modes
RainSafe™ weather protection for use in extreme weather conditions
Hook flash button
Fully functional with either line polarity
Audible electronic ringer for call backs
High current and over voltage protection
High impact polycarbonate case
Field replaceable spring-loaded belt clip
Hearing aid compatible receiver
Transmitter Mute switch
Talk and Monitor modes
Ergonomic design
Lightweight unit is easily transported
Specifications: Loop Limit: 2.4 kOmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)
DC Resistance (Talk Mode): 150 Otypical at 80 mA current
AC Impedance (Monitor Mode):
Low impedance (Ring position) 600 Oat 1 KHz typical
High impedance (HI Z position) 100 kOminimum at 1 KHz
Rotary Dial Output: 10 pps .5 pps
Pulsing Rate: 60 % ± 2 %
Percent Break: 800 ms typical
Interdigit Interval Leakage During Break: > 50 kO
DTMF Output: ±1 % maximum
Tone Frequency Error Level per Tone Pair: dBm maximum, - dBm minimum
High versus Low Tone Difference: 4 dB maximum
Temperature:
Operating: -5 degree C to degree C
Storage: -40 degree C to degree C
Drop: 1 meter, 4 times
Altitude: To 3,000 meters (10,000 feet) maximum
Relative Humidity: 10 %to 80 % (non-condensing)
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Pro3000 Analog Probe specifications
User interface:
ON/OFF pushbutton
Volume dial
Replaceable tip
3.5 mm earphone jack
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Specifications: These kits contain essential industry standard telecommunications tools and test equipment.
D814 industry standard punchdown tool for reliable terminations
EverSharp 66/110 cut blade provides flexibility for different block and jack terminations
Cable Stripper quickly rings and slits many types of cable
Use the Probe Pic to check for loose or damaged connections
Cut and strip wire cleaner and faster with the Electricians D-Snips
Connect to jacks for testing with the standard 4-Wire Modular Adapter
A soft zippered pouch keeps your tools all in one convenient place
Fluke Networks' Electrical Contractor Telecom Kits are comprised of industry standard telecommunications tools and test equipment, in a durable cordura case. The kits are designed for technicians who install, test and troubleshoot phone and data lines.
Includes a Pro3000 Analog Ton...