Specification: Dimension: 5.58" x 4.06" x 1.23"
Weight: 0.93 lbs.
1 x HDMI Type A Female (Black)
1 x LC Simplex Connector (SFP)
1 x captive screw connector, 3 pole
1 x 3.5mm phone jack (Black)
1 x DC Jack (Black)
600 m with single mode (SM) fi ber
Wavelength: 1310/1550 nm for SM
Data rate: Single fi ber: 1080p/60Hz (24-bits,3.125G bps ), 720p/60Hz(24-bits,3.125G bps)
1 (Green) Power/Link LED
Power Consumption: DC5.3V, 2.4W
Metal Housing
Feature: Extends the transmission range of HDMI, IR and RS-232 signals using one fi ber optic cable
Very long distance transmission - up to 600m for VE882
HDMI (3D, Deep Color), HDCP compatible - signaling rates up to 3.125 Gbits
Superior video quality - up to 1080p@60Hz
FPGA design extends digital signals to longer distances
Uses one fiber optic cable...
Compatible: EOS Rebel T1i EF-S 18-55mm IS
G11, S90, SX200 IS, SX120 IS, SX110 IS, D10, SD3500 IS, SD990 IS, SD970 IS, SD890 IS, SD790 IS, SD880 IS, SD980 IS, SD960 IS, SD940 IS, SD780 IS, SD1400 IS, SD1300 IS, SD1200 IS, SD770 IS, A3100 IS, A3000 IS, A2100 IS, A2000 IS, A1100 IS, A1000 IS, E1
Specification: Elements: Fixed-charge back plate, permanently polarized condenser
Polar Patterns: Line-cardioid, LR stereo
Low Frequency Roll-off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo)
Impedance: 50 ohms
Maximum Input Sound Level: 128 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (typical)
Mono: 106 dB, 1
Frequency Response: 40-15,000 Hz
Feature: Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
Handles loud sound sources without distortion
Three-position adjustable attenuator and switchable low-frequency roll-off
Integral rubber shock mounts isolate