Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Specifications: Device Support: SATA III/II/I HDD or SSD or Hybrid
Device Size: 3.5" or 2.5" SATA HDD/SSD/Hybrid
Internal Interface: Standard SATA
External Interface: USB 3.1 Type C
Interface Cable x2:
USB Type-C to Type-C (for system with Type-C port)
USB Type-C to Type-A (for system with Type-A port)
USB cable Length: 30 inches / 800mm each
HD Capacity: Up to 12TB
Material: Aluminum Casing, ABS Tray
AC Adapter Output: 12VDC, 2A.
Specifications: Bus Type:PCI Express
Type Standard:Profile (LP bracket incl.)
Chipset:NEC UPD720201
Interface: USB 3.0 Port
Type and Rate :USB 3.0 - 5 Gbit/s
Connector Type(s): 1 - PCI Express x1 Male
External Ports: 2 - USB Type-A (9 pin) USB 3.0 Female
Internal Ports : 2 x US 3.0 Internal Ports (20 pin connector) front panel for floppy bay
Internal Ports : 1 - SATA 15 pin interface
Package Contents: 1 x PCIe USB 3.0 PCI express card
1 x Driver CD
Compatibility: Compatible Models:
Visit www.asus.com for latest compatible model lists.
Maximum numbers of M.2 SSD support will vary, depending on different CPU specs and PCIe bifurcation settings in different ASUS motherboards. Please see the FAQ link for further information:
https://www.asus.com/support/FAQ/ 1037507
Specifications: Interface:
PCIe 5.0 x16 interface, support data transfer rates up to 512 Gbps.
External Connectors:
4 x M.2 slots (Key M), type 2242/2260/2280/22110 (supports PCIe 5.0)*
* Supports PCIe M.2 storage devices only.
LED & Switch:
1 x M.2 FAN Power Switch
4 x M.2 access LEDs
Thermal Solution :
Active fan with heatsink, support fan control from MB chassis fan header
Dimensions:
29(L)*12.2(W) *1.5(H)cm
Compatible Models:
Visit www.asus.com for latest compatible model...
Size: Please Note As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the docking station before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering
Ports: a USB-C Power Delivery input port, an HDMI port, a DisplayPort, 1 USB-C data port, 3 USB-A ports, 1 Ethernet port, an AUX port, an SD card slot, and a microSD card slot.