Specifications: Power requirement: 5VDC
HDD size support: 2.5" hard drive(compatible with 9.5mm height drive only)
HDD interface support: SATA hard drive
Minimum System Requirements: Windows XP, Vista, 7 / Mac OS 10.x / Linux
Computer with USB 3.0 super speed or USB 2.0 interface
Enclosure interface: USB3.0 (Max. 5Gbps) compatible with USB 2.0
Maximum Capacity (per Bay): Up to 1TB (9.5mm thickness)
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Specifications: M.2 SSD Support: M.2 (NGFF), B Key or B+M Key
Internal Interface: 1 x M.2 (NGFF, B-Key)
External Interface: Standard USB 3.0 Micro-B
Computer Interface: USB Type A required
USB cable connector: USB 3.0 Micro-B and USB 3.0 Type-A
USB cable length: 475mm / 18 inches
Dimensions: 104 x 40 x 15 mm / 4.1 x 1.6 x 0.6 inches
Specifications: M.2 size: Length support 2230, 2242, 2260, 2280
M.2 Support: M.2 NVMe with "M" Key Only
USB cable connector: USB-C to USB-C
USB cable length: 300mm / 11.8 inches
Specifications: SilverStone’s CA03 is a high quality M.2 SSD screw kit for computer professionals and enthusiasts. It includes two sets of precision machined standoffs / nuts of different heights, screws, washers, and matching screw driver.
Content:
M.2 hexagonal screw nut (thin), size: M2 x 3 + 2.5mm - 5pcs.
M.2 hexagonal screw nut (thick), size: M2 x 2.5 + 4.5mm - 5pcs.
M.2 screws, size: M2 x 2.5mm - 10pcs.
Plastic washers, size: 5 x 0.5mm -10pcs.
Screwdriver - black plastic head - 1pc.
Specifications: Chipset: ASMedia 2364
Compliant with USB 3.2 Gen 2x2 specification revision 1.0
Compatible with PCIe 3.0 x 4 specification
USB data transfer rate: Up to 20Gbps
SSD type (not included): M.2 PCIe NVMe SSD (M Key). Note: Not compatible with M.2 SATA SSDs
SSD size: 2230 / 2242 / 2260 / 2280mm
Power source: USB-C Bus-powered (5V)
UASP: Yes
Hot plug: Yes
Operating Systems Supported: Windows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later
Specifications: Built in M.2 M-Key Recep5cal Connector
PCI Express Base Specifica5on Rev 3.0
NVM Express 1.2a
3.3v, 5A maximum output current
Short Circuit Protec5on
Thermal Shutdown Protec5on
Windows 7/8/8.1/10 64-Bit
Package Contents: 1 x Adapter
1 x Copper Nut
1 x M3x3 Screw, M3x5 Screw
2 x Washers
1 x SFF-8643 to U.2 Adapter Cable