Compatible Phone Manufacturer: Achieved with Smart USB Charge Controller Compatible with iPad,iPhone and Most Tablets or Cell Phone from Samsung , Nokia , Sony , LG , HTC etc
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and gre...
Specifications: This type C charging block supports both PD and QC 3.0, delivering a total power of up to 40W. The USB-C port provides a charging speed of 20W, four times faster than conventional 5W chargers.
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Ports: 1 upgraded USB 3.0 ports, speed up to 5 Gbp/s. 2 downstream USB 2.0 Ports speed up to 480 MB/s, suitable for PC computer, laptop, MAC, U disk, card reader, USB mouse, USB keyboard, scanner, digital cameras, USB sound cards, hard disk boxes and other devices.
Compatible Phone Model: Compatible With MacBook Pro 14'', MacBook Pro 13'', MacBook Pro, MacBook Air, Compatible With iPhone 15, iPhone 15 Pro, iPhone 15 Pro Max, iPhone 15 Plus, iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini,
Standard USB Port: 6
Specifications: Multiport usb charging station with 3 USB-A QC3.0 ports, 3 USB-C PD3.0 ports; 65W x 2 USB-C ports when used independently, providing full speed PD charging for laptops.
Features: 6 Ports USB Charging Station: Multiport usb charging station with 3 USB-A QC3.0 ports, 3 USB-C PD3.0 ports; 65W x 2 USB-C ports when used independently, providing full speed PD charging for laptops. The multiple usb charging station supports 6 devices fast charging at the same time.(Warm Tip: We suggest
Specifications: This fast wall charging plug has a maximum output of 50W, which can fully charge your devices faster compared to ordinary plugs, greatly reducing your waiting time. Let you enjoy super fast charging, bring faster and more efficient charging experience for all devices