Computer Accessories

• Thermal Conductivity: 14.2 W/mK
• Long Term Operating Temperature: -250 °C / +350 °C
• Model #: TG-KE-002 R

• Color: Black
• Model #: BESBN-GC HOLDER10 BK

Limited time offer, ends 04/26

• Thermal Conductivity: 6.0 W/mK
• Long Term Operating Temperature: -40 to 200 C
• Model #: BL-GJDPX4

• Model #: TG-KS-33-33

• Model #: Kryonaut 1g - TG-K-001-RS

• Model #: k001 5 wipe combo

• Model #: K-001 Combo

• Volume / Net Weight: 20g
• Long Term Operating Temperature: -50 to 200 C
• Model #: DRG-UX-20g

• Volume / Net Weight: 10g
• Thermal Conductivity: 14.8W/mk
• Long Term Operating Temperature: -55 to 200 C
• Model #: DR-UTP-8-10G

• Model #: DRG-U6 PRO-10g

• Model #: 11-001-057x10

Limited time offer, ends 04/30

• Color: Silver
• Changer Type: Other
• Model #: 11-001-057x20

• Model #: CE 001

• Type: Case Fan
• Bearing Type: Sleeve
• RPM: 2000-2499 RPM
• Air Flow: 30-35 CFM
• Model #: CF9025BLA2510

• Model #: C-001 Combo

Limited time offer, ends 04/26

• Brand: Adiven
• Part Number: AD-CPUHD-QJD
• Color: Black
• Specifications: Screw Adjustment Design Adjustable height to match various computer cases and motherboards. The supportable height range of our gpu riser is 70-120mm. Magnetic Non-Slip Base The magnets in the base of the gpu stand. There are non-slip washers on both sides of the gpu holder, which will not damage the chassis. All-aluminum Metal Material Provides strong and long-lasting support. GPU brace support is made of all-aluminum metal, can be used as a long-term replacement. Versatile Compatibility Our gpu support bracket accommodating both traditional and long power supply bays, to cater to every user's needs.
• Model #: AD-CPUHD-QJD

• Color: N/A
• SLI Bridge: 2-Way
• Option: 0 Slot Spacing HB SLI
• Model #: DZ-XK-Bridge-001

Limited time offer, ends 04/26

• Color: Black
• Model #: BL-XKZJ02-B

• Model #: VC-16BLAMI

Limited time offer, ends 04/26

• Brand: Adiven
• Part Number: AD-CPUHD-DU
• Color: Black
• Option: Black
• Model #: AD-CPUHD-DU

• Model #: BEGPU SB 1688K01

• Model #: 8567457430

Limited time offer, ends 04/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Model #: CE-001 Combo

• Model #: TG-CA-32-32-02-R

• Model #: tg-c-001

• Model #: BEHANCHE XKZ-27F BK

• Model #: TG-K-001 3pack

• Volume / Net Weight: 1.0g
• Thermal Conductivity: 73 W/mK
• Long Term Operating Temperature: 10 °C / +140 °C
• Features: Thermal Conductivity: 73 W/mk Consistency: Liquid Viscosity: 0,0021 Pas Density: 6,24g/cm3 Recommended Temperature: 10 °C / +140 °C
• Model #:

• Model #: KE-002 Combo

• Part Number: COOLMOON GT8
• Color: N/A
• SLI Bridge: N/A
• Option: ARGB
• Model #: GT8 Pink

Limited time offer, ends 04/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 04/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 04/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271

• Model #: SRT-PCM-1-5031025

Limited time offer, ends 04/30

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128