Computer Accessories

(22)

• Type: Case Fan, Radiator Fan
• Bearing Type: Hydraulic
• RPM: 500 - 1500 R.P.M PWM
• Air Flow: 82.23 CFM
• Model #: CL-F098-PL14SW-B

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: <1600 RPM
• Air Flow: 35-40 CFM
• Model #: ARROW12

• Type: Case Fan
• Color: Red
• Model #: B07J5SRR26

• Model #: ACFAN00274A

(14)

• Type: Case Fan
• Bearing Type: Hydraulic Bearing Gen.2
• RPM: PWM 500 ~ 2500 R.P.M
• Air Flow: 72.69 CFM
• Model #: CL-F121-PL12GM-A

(14)

• Type: Case Fan, Radiator Fan
• Bearing Type: Hydraulic Bearing Gen.2
• RPM: 500 - 2000 RPM PWM
• Air Flow: 58.35 CFM
• Model #: CL-F117-PL12BL-A

• Type: Liquid Cooling System
• Block Dim.: 89 x 91 x 101 mm
• Block Material: Copper
• Radiator Size: 399.5 x 120 x 30 mm
• Model #: ASUS ROG RYUJIN III 360

• Type: CPU Water Cooling
• LED: Addressable RGB
• Model #: GD-CHIONE M4-360

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 1 - 5 dBA
• Model #: 63916-Av5z4-nWA

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 1 - 5 dBA
• Model #: 78072-1IMZko5O0

• Model #: 552614544963

(15)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 AMD Socket sTR4 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Material: Copper
• Radiator Size: 270x 120 x 27 mm
• Model #: CLW0224-B

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: 900~1850RPM±10%
• Air Flow: 68CFM
• Model #: ZC-ZSWhite*3

• Model #: 34961-XA8b29xY6-QPyt

(126)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Compatibility - Intel: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
• Block Material: Copper
• Model #: CL-W319-PL12TQ-A

• Model #: ROG RYUO IV 360 ARGB White

• Type: Case Fan
• Bearing Type: Fluid Dynamic
• RPM: 0-2000 RPM
• Air Flow: 48.8 CFM/92.91 m³/h
• Model #: RB095S7G462

(126)

• Type: Liquid Cooling System
• Block Compatibility: AMD Socket AM2 / AMD Socket AM2+ / AMD Socket AM3 / AMD Socket AM4 / AMD Socket AM5 / AMD Socket FM1 / AMD Socket FM2 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1366 / Intel LGA 1700 / Intel LGA 2011 / Intel LGA 2011-v3 / Intel LGA 2066
• Block Compatibility - Intel: LGA 2066, LGA2011-3, LGA2011, LGA1366, LGA 1700/1200/1156/1155/1151/1150
• Block Material: Copper
• Model #: CL-W319-PL12BL-B

• Model #: ACFAN00321A

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

(14)

• Type: Case Fan
• Bearing Type: Hydraulic Bearing Gen.2
• RPM: 500 ~2000 R.P.M
• Air Flow: 58.35 CFM
• Model #: CL-F117-PL12WT-A

• Model #: XB0CKXCP1LW

Limited time offer, ends 07/25

• Type: M2 SSD Heatsink
• Color: RGB
• Model #: 2#Q0961_B

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

(25)

• Type: Distro-Plate with Pump Combo
• Pump Dim.: 360 (L) x 120 (W) x 84.8 (H) mm
• Reservoir Capacity: 200 ml
• Specification: Dimension: 360mm(L) x 120mm (W) x 84.8mm (H) Material: PMMA Capacity: 200ml Maximum Flow Rate: 1135 L/h Maximum Pressure: 50 pSI Input Voltage: 12V / 5V Power Input: 37W / 3.5W Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W263-PL00SW-A

• Brand: Seasonic
• Series: MagFlow
• Fan Size: 120mm
• LED: Non-LED
• Model #: MagFlow 1-Fan Kit

Limited time offer, ends 08/11

• Fan Size: 120mm
• LED: RGB
• Type: Case Fan
• Bearing Type: Hydraulic bearing
• Model #: Y12RGBC3PACKW

(2)

• Type: Case Fan
• Bearing Type: Hydraulic Bearing
• RPM: 500 - 1500 R.P.M
• Air Flow: 42.45 CFM
• Model #: CL-F073-PL12SW-A

• Brand: Alphacool
• Model: 1021497
• Part Number: 1021497
• Color: Black
• Model #: 1021497

• Brand: Alphacool
• Model: 13874
• Part Number: 1025035
• Color: Clear
• Model #: 13874

• Type: Case Fan
• Bearing Type: Fluid Dynamic
• RPM: 900~2200RPM±10%
• Air Flow: 76CFM
• Model #: ZC-ZS-TI White*3

(1)

• Type: Liquid Cooling System
• Model #: BPN-RL2242SL

• Type: CPU Block
• Model #: GH480N-30