Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A...
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Pro3000 Analog Probe specifications
User interface:
ON/OFF pushbutton
Volume dial
Replaceable tip
3.5 mm earphone jack
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Specifications: Color: Silver Compatible Drive Type: 2.5" SATA 1.5 / 3 / 6 Gb/s HDD / SSD (Up to 15mm) Device Interface: SATA Device Fit: 3.5" SATA Drive Bay Transfer Rate: Up to 6 Gb / sec. (depending on hard drive speed) Material: SECC Dimension (L x W x H): 5.77" x 4.0" x 1.0" Weight: 0.72 lb.