Computer Accessories

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Type: CPU Block
• Model #: 6932167224453

• Color: Black
• Model #: BESBN-VSC/GL-01 BK

• Model #: K620-PB-610242221837

(1)

• Type: VGA Block & Cooler
• Model #: BP-TEKIT-3090MV

Limited time offer, ends 07/31

• Model #: 11-001-345

• Model #: h2020PB00MO4RDBY

• Brand: Alphacool
• Model: 10293
• Part Number: 1026637
• Color: BLACK 5V ARGB
• Model #: 10293

• Type: Liquid Cooling System
• Fan Size: No Fans
• Model #: A-XF6900XT-X_RBW

Limited time offer, ends 07/31

• Model #: 11-001-235

Limited time offer, ends 07/31

• Model #: 11-001-346

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Type: CPU Cooler Fan
• Power Connector: 4 Pin
• Model #: BASA0710R2U

• Model #: a19122800ux0675

Limited time offer, ends 08/16

• Type: Fan only
• Power Connector: 4 Pin
• Color: Black
• Model #: ST PLD08010B12HH

(1)

• Model #: MGY-ADSB-N03G-R1

• Model #: Adapter-005-RVS-Black

• Model #: N-RTX3070FE-X

• Type: CPU Block
• Model #: N-GV4080EOC-X

• Type: CPU Block
• Model #: GBN-AS4090TUFOG

• Model #: BEHANCHE XKZ-27F BK

• Model #: 20X22AA

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 1 - 5 dBA
• Model #: 63916-Av5z4-nWA

• Model #: Y7000P-2018

• Model #: BEJP-RGB 4.0CM GPU-B

• Bearing Type: Fluid Circulative Bearing
• Air Flow: 25-30 CFM
• Noise Level: 1 - 5 dBA
• Model #: 78072-1IMZko5O0

Limited time offer, ends08/02

• Brand: SRhonyra
• Model: SR166S4H61
• Color: White
• Features: 4 native HDMI outputs
• Model #: SR166S4H61

• Model #: VC-YZJWHI

• Length: N/A
• Model #: DZ-Cable Comb-0W

Limited time offer, ends 07/31

• Model #: 11-001-290

• Model #: 355756708213

Limited time offer, ends 08/07

• Model #: 4687964399

• Model #: 562600100102

• Model #: 6402411564111ASDFA6641911

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272