Computer Accessories

• Type: CPU Cooler Fan
• Bearing Type: Ball
• RPM: 4000-4499 RPM
• Noise Level: 10 - 15 dBA
• Model #: DE07015B12L 0

• Type: CPU Block
• Model #: RT12M-TOOL

• Type: CPU Block
• Model #: B-HHDR

• Type: Case Fan
• Bearing Type: Hydro Bearing
• RPM: <1600 RPM
• Air Flow: 45-50 CFM
• Model #: 609015786413

• Type: Case Fan
• Bearing Type: Hydraulic
• RPM: <1600 RPM
• Air Flow: 20-25 CFM
• Model #: RGB120MM8PCS

(24)

• Type: Case Fan
• Bearing Type: Rifle
• RPM: 650 - 1800 RPM +/- 10%
• Air Flow: 47.2 CFM +/- 10%
• Model #: MFL-B2DW-18NPA-R1

• Type: CPU Block
• Model #: B-3090TC-X-NE

• Model #: 47267-mZa4nL_wm

Limited time offer, ends 07/31

• Part Number: AAATHPSP
• Model #: AAATHPSP X10

• Fan Size: 120mm
• LED: ARGB
• Type: Case Fan
• Bearing Type: Hydraulic bearing
• Model #: FXWXARGB-01B

• Type: CPU Water Cooling
• LED: Addressable RGB
• Model #: GD-CHIONE M4-360

• Model #: BEINTEL711512CPUCASE100PC

• Type: CPU Block
• Model #: N-GV5090DWF-X-V2

(1)

• Model #: MGY-ADSB-N03G-R1

• Model #: 88701-VxZBCIiGC

• Type: CPU Cooler Fan
• Power Connector: 4 Pin
• Model #: BASA0710R2U

• Type: CPU Block
• Model #: RTP14M-630

• Brand: Dynatron
• Fan Size: 60mm
• Bearing Type: 2 Ball
• Type: Fan & Heatsinks
• Model #: R14

• Type: CPU Block
• Model #: 6932167224453

• Type: CPU Block
• Model #: N-MS5090DTRIO-X

Limited time offer, ends 07/31

• Type: Enclosure
• Maximum Capacity (per Bay): Up to 1TB
• Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
• Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
• Model #: ENU325SSDHTS

• Model #: NA-HC6 chromax.white

• Type: CPU Block
• Model #: F-DV-SBK

• Series: Air Cooler Series
• Color: Black
• Type: Fan & Heatsinks
• RPM: 800-2200rpm
• Model #: AVC Cooler-003-Tri

• Type: Case Fan
• Power Connector: 2 Pin
• Color: Transparent
• Model #: led12025col

• Model #: AFC0912DB

• Type: Accessories
• Model #: NM-M1-MP83 chromax.black

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: 62449-Yp6l_UC9L-i5CN

• Type: CPU Block
• Model #: CP-NWD5-V2-CT60-100

• Type: Case Fan
• Bearing Type: Fluid Dynamic
• RPM: 900~2200RPM±10%
• Air Flow: 76CFM
• Model #: ZC-ZS-TI White*3

Limited time offer, ends 07/31

• Model #: 11-001-330

• Model #: BEDONGRONG236157WT

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Fan Size: 120mm
• Series: N/A
• Type: CPU Water Cooling
• RPM: 800-2150 RPM±10%
• Model #: GL360-RGB Black