Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A
Operating Temperature: -20° to ...
Specifications: Compatibility: Pop series and compatible Fractal Design cases
USB specification: USB 3.1 Gen 2 (10 Gbps)
External connector: USB Type-C
Internal connector: Key-A 20-pin
Specifications: Compatibility: 120 mm case fan mounts, standard 2.5"/3.5" drives, and most pumps/reservoirs
Package Contents:
2 x Multi-bracket
8 x M3 Screws for 2.5” drive
8 x 6-32 Screws for 3.5” drive
8 x HDD dampers
8 x 6-32 Screws for fastening
Specifications: Materials: ABS Plastic, Tempered Glass
Dimensions: 58 x 58 x 177mm / 2.29" x 2.29" x 6.97" (Incl. Protrusions)
Included Accessories:
ARGB GPU Support Bracket
ARGB 3-Pin
Manual
Specifications: Screw Adjustment Design
Adjustable height to match various computer cases and motherboards. The supportable height range of our gpu riser is 70-120mm.
Magnetic Non-Slip Base
The magnets in the base of the gpu stand. There are non-slip washers on both sides of the gpu holder, which will not damage the chassis.
All-aluminum Metal Material
Provides strong and long-lasting support. GPU brace support is made of all-aluminum metal, can be used as a long-term replacement.
Versatile Compatibility
Our gpu support bracket accommodating both traditional and long power supply bays, to cater to every user's needs.