Specifications: TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit,
Specifications: TG-50 adopts a composite formula of nano carbon tubes and liquid metal, with a thermal conductivity exceeding 18.2W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores by more than 25 ℃,. Its non-conductive properties eliminate the risk of short circuits, with good viscosity optimization. Single point/nine
Specifications: TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit,
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specification: Pacific G1/4 PETG Tube 16mm OD Compression - Gold (6-Pack Fittings)
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.