Operating Systems Supported: Operating System Supported: Linux 2.6.32
Operating System Supported: Mac OS X 10.10 Yosemite
Operating System Supported: Mac OS X 11.0 Big Sur
Operating System Supported: Windows 10
Operating System Supported: Windows 11
Operating System Supported: Windows 7
Operating System Supported: Windows 8
Operating System Supported: Windows 8.1
Operating System Supported: Windows Server 2012 R2
Operating System Supported: Windows Server 2016
Operating System Supported: Windows Server 2019
Specifications: U Height: 1U
Frame Type: Open Frame
Wallmountable: Yes
Front Door Type: Open
Fan(s): No
Weight Capacity: 17.7 lb [8 kg]
External Width: 19 in [483 mm]
External Height : 1.7 in [44 mm]
External Depth: 6 in [152 mm]
Included in Package:
1 - 1U Hinged 19" Wallmount Bracket
4 - Screws
Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet
Auto MDI/MDI-X
UTP port auto-senses network speed
Switch selectable half or full duplex operation on the fiber port
Fiber lengths up to 2Km
2 Power Choices - AC-DC Adapter or USB
5 LED Function lights
Uses 62.5/125 or 50/125 Multimode cable
Wavelength: 1310nm
Supports Link Fault Pass-through (LFP) for easy tracing of network link failures
Interfaces/Ports:
1 x RJ-45
1 x ST Duplex
Connectivity:
UTP
Fiber
Connectivity Media:
10/100Base-TX Category 5 UTP
10/100Base-TX Category 6 UTP
100Base-FX 50/125 µm Multi-mode Fiber
100Base-FX 62.5/125 µm Multi-mode Fiber
Package Contents:
N784-001-ST UTP to Fiber Media Converter
10/100 Media Converter, UTP - ST
AC-DC Power Adapter ( 100-240V )
Owner's Manual
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Mobile Rack Drives Support: 1 x 2.5" Drive to PCI Slot
Mobile Rack Interface: SATA I/II/III
Specifications: Max. HD Capacity: 500 GB
Enclosure Type: Aluminum and Steel
Compatible Drives: 2.5" SATA
Host Connectors: 1 - 7 pin SATA DATA Male
Host Connectors: 1 - 15 pin SATA Power Male
Drive Connectors: 1 - 7 pin SATA DATA Female
Drive Connectors: 1 - 15 pin SATA Power Female
Specifications: Use to connect two RJ45 patch cables for a longer cable length
Straight though design
Tripp Lite warrants this product to be free from defects in materials and workmanship for life
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Pro3000 Analog Probe specifications
User interface:
ON/OFF pushbutton
Volume dial
Replaceable tip
3.5 mm earphone jack
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Specifications: 4Kn Support: Yes
General Specifications: Not compatible with M.2 SATA or AHCI based SSDs
Maximum Data Transfer Rate: 10 Gbps
MTBF: 233,398 Hours
TRIM Support: Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
NVMe (PCIe Gen 3)
UASP Support: Yes
Host Connectors:
1 - M.2 (PCIe, M-Key, NVMe, NGFF)
1 - USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps) Female
Dimension: 4.30" x 1.60" x 0.50"
Weight: 2.30 oz.