Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specification: Pump Compatibility: DDC
Installation Compatibility: 120/140 mm fan/radiator
Seal O-Ring: DuPont VITON
Reservoir - ID: 126.72 /W: 1.78 (AS049)
Color: Transparent
RGB LED type: Digital-RGB (addressable)
LED Number: 5050, 18pcs
LED Electricity Spec: 5V/ 0.7A/ 3.5W
Capacity: 200ml
Materials: Acrylic body, Acrylic backplate, Steel bracket
Max Water Loop Temperature: 60 degree C
Fill Port: 1 x G 1/4
No. of Inlet: 3 x G 1/4
No. of Outlet: 1 x G 1/4
Specifications: CORSAIR TM30 thermal paste helps you push your PC to its limit, with a low-viscosity premium zinc oxide thermal material that’s easy to apply. TM30’s ultra-low thermal impedance ensures high-efficiency heat transfer between your hardware and cooler, lowering temperatures and allowing for higher clock speeds.
Net Weight: 3g
Thermal Conductivity: 3.8 W/mK
Thermal Impedance: 0.01°C -in2/W
Viscosity: 2300K cPs
Specific Gravity: 2.5g/cm3