Fans & PC Cooling

• Model #: 1-Water-Cooling1340

off w/ promo code PHAKF63, limited offer

• Type: Tool Set
• Specification: Materials Tube Cutter: Plastic + Steel Bending Insert: Rubber Bending Guides: PP Squeeze Bottle: PE 24-Pin Jumper: PP Sandpaper: Paper Tube Cutter Compatibility 16 mm Hard Tube Bending Insert Compatibility For ID:12mm / OD:16mm Hard Tube Bending Guides Compatibility 16 mm Hard Tube Squeeze Bottle Capacity: 250 ml Sandpaper Grit: 240
• Package Contents: Tube Cutter 1x Silicone Bending Insert 1x Bending Guides (set) 1x Squeeze Bottle 1x 24-Pin Jumper 1x Sandpaper 1x Manual 1x
• Model #: PH-GEF_TLS_BK

• Model #: 1-Water-Cooling1130

• Type: RAM block
• Model #: RAMWBT-PA2

• Type: CPU Block
• Model #: RGV-TT-P3-P-K

(203)

• Brand: Thermaltake
• Fan Size: 92mm
• Bearing Type: 1 x Sleeve Bearing
• Type: Fan & Heatsinks
• Model #: CLP0556-B

• Model #: 1-Water-Cooling1518

• Type: Radiator
• Color: Black
• Model #: Dabel-28b 360

Limited time offer, ends 01/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

• Model #: 27-Com-Cooler1092

• Model #: CTR2-DBK12-TBK

• Model #: 27-Com-Cooler0665

• Model #: CTR2-DW12-TBK

Limited time offer, ends 01/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 1-CaseFans1260

• Model #: 1-Com-Cooler2246

• Model #: 27-Com-Cooler0233

• Model #: 1-Com-Cooler1067

• Model #: 1-Com-Cooler1625

• Model #: 1-Water-Cooling0034

• Model #: 1-Com-Cooler3069

• Model #: 1-CaseFans1111

• Brand: greenDracaena
• Series: Green
• Part Number: D-PVC-2-Blue
• Block Material: Polyethylene Terephthalate Glycol (PETG)
• Model #:

• Model #: 1-Com-Cooler0266

• Model #: 1-Com-Cooler1863

• Model #: 9359014271823

• Model #: 1-Com-Cooler1065

• Model #: HT-ComCoolin000705

• Model #: 1-Com-Cooler2120

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

• Model #: 9435761160372

• Brand: greenDracaena
• Series: White
• Part Number: D-PVC-2-Blue
• Block Material: Polyethylene Terephthalate Glycol (PETG)
• Model #:

• Model #: 652843896939

• Model #: HL8GX-00-B08JL-1

• Model #: 27-Com-Cooler2596

• Model #: D-45-Rotary-Black-2