Your Browsing History
- In Stock
Quick View
Waveshare 4inch DSI Round Touch Display 720 × 720 Resolution, 10-Point Capacitive Touch IPS Display Screen Compatible with Raspberry Pi 5/Pi 4B/3B+/3A+, Compute Module 4/Compute Module 3+/CM3
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-294
- $292.72 –
- Free Shipping
Quick View
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W, SC16IS752+SP3232 Dual Chip Convert SPI to RS232 Data Rate up to 921600bps Embed Multi Protection Circuits
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-150
- $59.25 –
- Free Shipping
Quick View
1.27inch RGB OLED Display Module 128×96 Resolution Screen, 262K RGB Colors SPI Interface 3.3V / 5V Operating Voltage, for Ardu/Raspberry Pi/STM32
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-103
- $68.66 –
- Free Shipping
Quick View
Compute Module IO Board with PoE, Composite Breakout Board for Raspberry Pi CM4S/CM3/CM3L/CM3+/CM3+L, Onboard 4x USB Ports/2x CSI Camera/HDMI/DSI/USB to UART Interfaces
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-368
- $125.83 –
- Free Shipping
Quick View
RP2350-Plus Development Board Pico-Like MCU Board Based On RPi RP2350A Dual-Core & Dual-Architecture Design, Compatible with Raspberry Pi Pico add-on Modules, Type-C Connector (Without Pinheader)
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-256
- $35.57 –
- Free Shipping
Quick View
2.13inch E-Ink Display HAT for Raspberry Pi 5/4B/3B+/3B/2B/Zero/Zero W/WH and Jetson Nano, 250×122 Pixel, White Black Red Three-Colors, SPI Interface
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-627
- $62.90 –
- Free Shipping
Quick View
Waveshare 2-Channel Isolated RS485 Expansion HAT, SC16IS752+SP3485 Dual Chip, SPI to RS485, Up to 921600bps, Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W HAT
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-139
- $70.11 –
- Free Shipping
Quick View
waveshare 1.5inch OLED Display Module for Raspberry Pi/for Arduino/STM32, 128×128 Resolution Black/White Two Display Colors OLED with SH1107 Driver, SPI / I2C Communication
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-104
- $54.69 –
- Free Shipping
Quick View
2.15inch e-Paper HAT+ Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/RDKX3, Red/Black/White Three-Color 296x160 E-ink Display Screen SPI with Driver Board
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-454
- $60.16 –
- Free Shipping
Quick View
1.3inch IPS LCD Display HAT Compatible with Raspberry Pi 5/ 4B/3B+/3B//A+/Zero W/WH/Zero 2 W/Pico/Pico 2W, etc. 240 x 240 Pixels, SPI Interface, with Embedded Controller
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-245
- $51.96 –
- Free Shipping
Quick View
1.9inch LCD Display Module 170×320 Resolution Screen, 262K RGB Display Color SPI Interface ST7789V2 Driver, Compatible with Arduino/Raspberry Pi / STM32, etc
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-106
- $51.96 –
- Free Shipping
Quick View
High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-320
- $123.09 –
- Free Shipping
Quick View
waveshare 2.23inch OLED Display HAT, 128×32 Pixels SPI/I2C Interface Embed SSD1305 Driver for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-530
- $65.64 –
- Free Shipping
Quick View
2.8inch HDMI IPS LCD 480×640 Capacitive Touch Display, USB-C or I2C Touch Port Adjustable Brightness, Fully Laminated Screen, Support All Raspberry Pi, Jetson Nano, PC Windows 11 / 10 / 8.1 / 8 / 7
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-141
- $172.34 –
- Free Shipping
Quick View
1.47inch Touch Screen Compatible with Raspberry Pi 5/4B/3B+/3B/Pico W/Pico 2W/ESP32-S3, 172x320 Resolution IPS LCD Display Module, SPI and I2C Communication, 262K Display Color
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-576
- $54.69 –
- Free Shipping
Quick View
PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-191
- $84.82 –
- Free Shipping
Quick View
POE HAT F for Raspberry Pi 5/Compute Module 5, Pi5 Power Over Ethernet HAT with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard, 40PIN GPIO Stack Header to Add Other HAT
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-474
- $82.05 –
- Free Shipping
Quick View
PCIe to 4-Ch PCIe FFC Adapter Board Compatible with Raspberry Pi 5, Expands PCIe Interface of Pi 5 to 4-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe Hats
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-424
- $87.55 –
- Free Shipping
Quick View
1.44inch LCD Display HAT Compatible with Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Pico/Pico 2W, etc. RGB 65K Color 128 x128 Pixels, SPI Interface, with Embedded Controller
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-182
- $49.22 –
- Free Shipping
Quick View
Protective Case Compatible with Raspberry Pi 7inch Touch Display 2 and RPi 5, Support Multiple 7inch Screens, Supports Installing RPi Hats, Reserved Rich Interfaces, White Color
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-567
- $49.22 –
- Free Shipping
Quick View
POE HAT (B) for Raspberry Pi 4B/3B+,Power Over Ethernet HAT with 0.91" OLED,Support 802.3af PoE Network,802.3af Power-Sourcing Equipment Required
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-412
- $82.05 –
- Free Shipping
Quick View
Sense HAT (B) for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W,Pi 40PIN GPIO Extension Header Onboard Gyroscope Accelerometer Magnetometer Barometer Temperature Humidity Multi Sensors I2C Interface
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-446
- $117.76 –
- Free Shipping
Quick View
Stepper Motor HAT Dual Onboard 2-CH HR8825 Motor Driver Chip,Drive Two Stepper Motors Up to 1/32 Microstepping,Apply to 3D Printer, Sculpturing Machine, Mechanical Arm,for Raspberry Pi/ Jetson Nano
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-459
- $65.81 –
- Free Shipping
Quick View
USB to 2.5G Ethernet Converter Module for Raspberry Pi 5/Jetson Nano/PC/Laptop/Windows/Linux/Android, USB 3.2 Gen1 to 2.5G USB ETH Adapter Module Driver-Free Plug & Play, 10/100/1000Mbps /2.5Gbps
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-431
- $70.85 –
- Free Shipping
Quick View
Waveshare Pico-Audio Expansion Module for Raspberry Pi Pico, Concurrent Headphone/Speaker Output, 8384kHz Audio Sampling Rate, Stereo Sound Effect, I2S Connectivity
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-251
- $52.98 –
- Free Shipping
Quick View
1.47inch Round LCD Display Module for Arduin/Raspberry Pi/STM32, IPS Screen Monitor 172x320 Resolution,SPI Interface 262K RGB Colors, Clear and Colorful Displaying Effect
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-490
- $52.01 –
- Free Shipping
Quick View
BME688 Environmental Sensor with AI Function, Supports Temperature/Humidity/Barometric Pressure/Gas Detection, I2C and SPI, Support Raspberry Pi/Raspberry Pi Pico/Arduino / ESP32,etc.
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-40
- $82.05 –
- Free Shipping
Quick View
GamePi43 Accessories Kit for Raspberry Pi 4B/3B+/3B/2B/B+ Portable Retro Video Handheld Game Console with 4.3inch IPS Display 800x480 Pixel 60 fps Smooth Gaming Experience Speaker Earphone Jack
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-340
- $235.30 –
- Free Shipping
Quick View
waveshare 7inch DSI LCD 1024×600 Touch Screen for Raspberry Pi 4B/3B+/3A+/Compute Module 4 (CM4)/Compute Module 3+ (CM3+) Toughened Glass IPS Display Capacitive Monitor 5-Points Touch Driver Required
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-195
- $202.32 –
- Free Shipping
Quick View
2inch LCD Module Compatible with Raspberry Pi 5/ 4B/3B+/3B/Zero W/WH/Zero 2 W/Ardu/STM32, 240 x 320 Resolution IPS LCD Display, 262K RGB Color, ST7789VW Driver, SPI Interface
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-407
- $49.22 –
- Free Shipping
Quick View
waveshare 1.32inch OLED Display Module 128×96 Resolution Screen, 16 Gray Scale 3.3V / 5V Operating Voltage SPI / I2C Communication, for Ardui/Raspberry Pi/STM32, etc.
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-102
- $46.71 –
- Free Shipping
Quick View
SIM7028 NB-IoT HAT with GSM Antenna Onboard 40PIN GPIO Header for Raspberry Pi 5/4B/3B+/3B/2B/Zero/Zero 2W/Jetson Nano,etc, Supports Global Band NB-IoT Communication, 2400bps ~ 460900bps Baudrate
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-485
- $68.37 –
- Free Shipping
Quick View
waveshare RGB Full Color LED Matrix Panel 64x64 Pixels, 2mm Pitch, Adjustable Brightness,Supports Raspberry Pi/Raspberry Pi Pico / ESP32 / Ardu,Display Text, Colorful Image, Animation
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-45
- $114.88 –
- Free Shipping
Quick View
Nano Base Board (B) for Raspberry Pi Compute Module 4 Lite/eMMC, with Standard CM4 Socket, with Raspberry Pi 40PIN GPIO Interface, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack
Limited time offer, ends 09/27
- Brand: Fervit
- Model #: C26.8.24CXY-15
- $76.58 –
- Free Shipping
Quick View
2.13inch Touch e-Paper HAT E-Ink Display 250×122 Pixels Compatible with Raspberry Pi Zero 2 W/Zero 2 WH/Pi Zero W/Pi Zero WH/Pi Zero, 5-Point Touch, Supports Partial Refresh, with ABS Case
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-496
- $90.26 –
- Free Shipping
Quick View
Stepper Motor HAT for Raspberry Pi 4B/3B+/2B/B+/Zero/W/WH/and Jetson Nano,DRV8825 Motor Controller Drives Two Stepper Motors, Up to 1/32 Microstepping,Use for 3D Printer,Sculpturing Machine etc
Limited time offer, ends 09/27
- Brand: LORDWORLD
- Model #: 26-8CXY24-336
- $73.84 –
- Free Shipping
Any questions? Our AI mode will help you find out quickly.
Try me now