Specifications: Temperature readings: Fahrenheit, Celsius
Temperature accuracy: 14°F to 158°F +/- 0.9°F; -10°C to 70°C +/- 0.5°C
Humidity accuracy: 10-90 RH ± 2%
Voltage: 12V (from RMCARD)
Input dry contact: 4
Connection port & cable: RJ45 Ethernet port x 2, 10 ft. cable, Daisy Chain x 8 Max
Features: Quick, real-time view of parametric data and system statuses.
Prompt alarm notification for fast event resolution.
Know environmental conditions of your data center for informed, efficient decision making.
Flexible communication regardless of device protocol.
Peace of mind knowing data is transported in a secure manner.
Save time configuring and updating firmware on managed devices.
Compatibility: 10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW V3.01 and higher
Note: The EMPDT1H1 probe is only compatible with the Network-M2 card; the existing EMP001 probe is not compatible with the new Network-M2 card.
Features: • Industrial power supply with integrated DIN-Rail mount
• Provides up to 150W of power (52V DC, 2.89A)
• Supported output voltage 48 – 56V DC
• High efficiency 93% and low power dissipation
• 150% peak load capability
• Built-in active Power Factor Controller (PF > 0.96)
• Cooling by natural air convection
• Protections: Overload,
Specifications: Load Rating: 20 amps @ 120 volts
Maximum Load Inrush Energy: 1400 Joules total during power-up
UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1(CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load): > 30 dB 100 KHz - 50 MHz
EMI/RFI Filter, Common Mode (50-ohm load): > 20 dB 1 MHz - 50 MHz
Under-Voltage Auto Shutdown: Adjustable from 90V to 110V
Over-Voltage Auto Shutdown: Adjustable from 130V to 150V
Endurance (C62.41-1991 Category B3 pulses): 1 kV>500,000; 3 kV>10,000; 6 kV>1000
Control Inputs: Momentary Switch, Latching Switch,Contact Closure or 5-30 Vdc
Input Control Current: 3 mA
DC Voltage Output: 12 Vdc, 40 mA maximum load
Auxiliary Relay Cont...