Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)
Specifications: Output
Output Power Capacity: 3200 Watts / 4000 VA
Max Configurable Power: 3200 Watts / 4000 VA
Nominal Output Voltage:120V,208V
Output Voltage Note: Configurable for 120/208 or 120/240 output voltage
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 47 - 63 Hz
Waveform Type: Sine wave
Output Connections: (1) Hard Wire 4-wire (2PH + N +G)
Input
Nominal Input Voltage: 200V,208V
Input Frequency: 45 - 65 Hz (auto sensing)
Input voltage range for main operations: 155 - 276V
Other Input Voltages: 240V
Specifications: Battery Volt-Amp-Hour Capacity: 816
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
Battery mounting: Stand alone battery stack
Expected Battery Life (years): 3 - 5
Replacement battery cartridge note: RBC 11 is composed of two seperate battery cells. The Net dimensions are measured per cell.
Compatibility: 10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW V3.01 and higher
Note: The EMPDT1H1 probe is only compatible with the Network-M2 card; the existing EMP001 probe is not compatible with the new Network-M2 card.
Compatibility: BK250B, BK280B, BP280, BP280B, BP280S, BP280BPNP, BP280PNP, BP280C, BP280S, BK300, BK350, BP350, BP350U, BK400, BK400B, BP420, BP420C, BP420PNP, BP420S, BP500, BP500CLR, BP500U, BK500, BK500M, F6C550-AVR Rev A, SU420VS, SU420NET, PCPER, PCPRO, BK500MC, SUVS420, BP280SX116, BP4201PNP, SP500DR, BP500UC, BP2801PNP, BK300C, BK300X116, BK500MC, BE500R, BE500U, BE500V, BK500BLK, BP350UC, BP420IPNP, SP500DR, SC420, BE500R, BK280
Please Note: For any BK200 or BK200B, please verify battery configuration before purchasing. To verify, open the battery door and check the number of batteries inside the unit. If your unit has one battery, you will need (1)RBC2 unit. If your unit has two batteries, you will need (1)RBC1 unit.
Specifications: Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Battery mounting: Stand alone battery stack
Expected Battery Life (years): 3 - 5
RBC Quantity: 1
Replacement battery cartridge note: RBC 12 is composed of two seperate battery cells. The Net dimensions are measured per cell.