Speed: 1. Charge the device using the USB cable provided. 2. Select the appropriate cleaning mode (Soft, Normal, Middle, Strong, or Super) based on your needs. 3. Wet the cleaning head and apply toothpaste. 4. Place the cleaning head against your teeth at a 45-degree angle and move it gently along the gum line. 5. After use, clean the device by rinsing it with water and storing it with the protective cover. 6. Replace the cleaning head every 3-6 months or as needed. 7. Always follow the safety guidelines provided in the user manual.
Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ml water tank. 3. Select one of the 3 modes (soft, normal, pulse) using the mode button. 4. Insert the desired tip (classic jet, tongue scraping, periodontal, or orthodontic) into the nozzle, ensuring it's fully inserted. 5. Place the tip in your mouth and guide it along your teeth and gums. 6. After use, remove the tip and rinse it under clean water. 7. Store the device with the tips attached to allow for proper air-drying. 8. Avoid using the device while sleeping or in the shower to prevent accidental water ingestion or device damage.
Speed: 1. Fill the detachable water tank with lukewarm water. 2. Attach the desired nozzle to the irrigator tip. 3. Turn on the device and select the appropriate cleaning mode using the mode button. 4. Aim the nozzle at the area you want to clean and gently move it along the gum line and between teeth. 5. After use, rinse the nozzles and the tank with water and allow them to dry completely. 6. Store the device in the included travel pouch for easy transport. Precautions: Do not use while sleeping or with a medical condition that makes you prone to falling. Keep away from children. Do not submerge the charging port in water. Always unplug and allow the device to cool before charging.
Speed: 1. **Preparation**: Fill the 220ML water tank to the desired level. 2. **Power On**: Press the power button to turn on the device. 3. **Select Mode**: Choose from 3 cleaning modes (Soft, Normal, or Pulse) using the mode button. 4. **Use**: Place the tip in your mouth, close lips to form a seal, and tilt the irrigator to direct the water flow. 5. **Cleaning**: After use, remove the tip, rinse it, and store it in the provided case. Wipe the unit clean and store it properly. 6. **Precautions**: Do not use in water or near open flames. Keep away from children. Do not use if you have any medical conditions that could be affected by water pressure. Always follow the instructions provided with the product.
Speed: 1. Fully charge the device for 4 hours. 2. Fill the 300ml reservoir with water or mouthwash. 3. Select a mode (Normal, Soft, Pulse, or Power). 4. Aim the irrigator at your gumline and press the button to floss.
Speed: 1. Fill the 300ml water tank with warm water. 2. Choose one of the 4 cleaning modes and adjust the water pressure using the pressure control button. 3. Place the tip of the irrigator in your mouth, pointing at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and teeth. 5. After use, remove the tip and rinse it under clean water. 6. Clean the water tank and allow all parts to dry before storing. 7. Always follow the safety warnings provided.
Speed: 1. Charge the device fully before first use and every 3 weeks for optimal performance. 2. Fill the 310mL water tank with warm water. 3. Choose from Normal, Soft, Pulse, or Point modes based on your needs. 4. Select the appropriate nozzle for your dental needs. 5. Place the tip in your mouth and adjust the water pressure as needed. 6. Move the tip along your gum line and teeth, pausing briefly on each tooth. 7. After use, remove the tip and rinse it under warm water. 8. Wipe the unit clean and store it with the tip facing up. 9. Avoid using hot water or leaving the unit submerged in water to prevent damage. 10. For a thorough clean, remove the water tank and clean it with warm water and mild soap. Allow all parts to air dry before storing.
Speed: 1. Fill the 300ML water tank with warm water. 2. Choose the desired cleaning mode on the smart LCD screen. 3. Attach the appropriate nozzle for the user. 4. Lean over the sink and aim the nozzle at the gum line. 5. Press the power button and move the nozzle along the gum line and between teeth. 6. After use, clean the nozzle and water tank, and allow the device to fully charge.