MakerFocus Wireless Tracker Supports GPS Galileo Multi-System Joint Positioning ESP32-S3 WiFi Bluetooth SX1262 UC6580 with 3000mAh Battery, 915MHz LoRa Antenna, 0.96-inch LCD Display for Meshtastic

About Wireless Tracker: Wireless Tracker is a development kit based on ESP32-S3FN8. Integrates SX1262 LoRa chipset and UC6580 GNSS chipset to provide fast GNSS solution for IoT. It can track any object and upload the data wirelessly by WiFi, Bluetooth, LoRaWireless Tracker supports L1 + L5/L2, and GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning. It is perfectly compatible with Arduino, can be widely used in development such as bicycle sharing services, tracking pets or livestock, locating vehicles, tracking children, etcFeature: 1. ESP32-S3FN8+SX1262+UC6580 chipset, supports WiFi, LoRa, Bluetooth, GNSS2. Low power design of dual frequency multi system based on 22nm technology3. Support L1 + L5/L2 and GPS, GLONASS, BDS, Galileo, NAVIC, QZSS multi-system joint positioning4. Support Ar duino development environment5. Onboard WiFi, Bluetooth dedicated 2.4GH z metal spring antenna, reserved IPEX (U. FL) interface for LoRa and GNSS use6. Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures7. Onboard SH 1.25 -2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching)8. Onboard 0.96 -inch 160*80 dot matrix LCD display, which can be used to display debugging information, battery power, and
other informationParameter: Master
Chip: ESP32-S3FN8LoRa
Chipset: SX1262GNSS
Chipset:
UC6580Frequency: 863-923MHzMax
TX Power: 21 1dBmReceiving
Sensitivity:
-139dBmWiFi: 802.11 b/g/n, up
to 150MbpsBluetooth: Bluetooth
LE: Bluetooth 5,
Bluetooth meshInterface: Type-C USB; SH 1.25 lithium battery interface; 2 * IPEX (U.
FL) interfaceBattery: 3.7V lithium battery power supplyOperating
Temperature:
-20-70Dimension: 65.48 * 28.06 * 13.52 mm-----------------------------------------------------------------------About 3000mAh Battery with Micro JST 1.25
Plug:
Specification: Standard
Voltage: 3.7VC
apacity:
3000mAhWeight: 194g (4PCS), 48.5
g/1unitDimensions (2mm): 65 * 36 * 10 mm / 2.56 * 1.42 * 0.39 inch (L*W*H)
Discharge Rate: 1CWorking
Current: 1.5AT
he maximum discharging current: 3COvercurrent
Protection: 1.8 - 2.1AT ype of
Connector: Micro JST 1.25S tandard
Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current 0.05C -----------------------------------------------------------------------Package
Content: 1 * Wireless Tracker4 * Pin Headers1 * Antenna2 * Power Cord1 * 3000mAh Battery with Micro JST 1.25 Plug