4pcs 5V 1 Channel High Level Solid State Relay Module DC Control AC 240V 2A with Fuse

5V 1 Channel High Level Solid Relay Module With Fuse 250V 2A

Introduction:

1. 5V 240V solid state relay 2A, output with resistance type fuse 240V 2A.

2. Dimension: 25*34*25 (length * width * height); weight: 13g

3. Input power supply: 5V DC (160MA)

4. Input control signal voltage: (the state of the 0-2.5V low level relay OFF), (the state of the 3-5V high level relay ON)

5. Blue KF301 terminal is connected to the line of control more convenient.

INPUT PART:

DC+: Connect the power supply positive (press the relay voltage power supply)

DC-: The cathode of a power supply

CH: Relay module signal trigger end (high level trigger effective)

HIGH LEVEL AND LOW LEVEL OF MEANING:

High level trigger refers to the signal trigger end (IN) had a positive voltage andthe negative pole of the power supply is usually between, and the triggering end of a trigger connected with the positive pole of a power supply, when the triggerend has a positive voltage or reached the trigger voltage, the relay is attracted.

Low level trigger refers to the signal triggering voltage between the end and the negative electrode of the power supply is OV, or trigger terminal voltage lower voltage than the positive power supply voltage, low to can trigger, so that relay,is usually the cathode of the power supply and the triggering end of a trigger mode connection, so that the relay is attracted.

ELECTRICAL PARAMETERS:

The static current voltage version of the working current of trigger voltage,trigger current

5V 0mA 12.5mA 3.3-5V 2mA

Note:Power supply must be DC, the voltage of the supply power voltage should be suitable for the module.