Your Browsing History
- Free 30-day Returns
$66.99
Meet Your Seller
Lilypad Kit Wearable Electronic LED and Sensor Kit Temperature Sensor with Cable,Electronic Components
- Each accessory has been carefully designed and has good wear resistance.
- Use conductive sewing thread to connect each PCB board with corresponding function to realize various novel and fun ideas.
- Learn how to sew basic circuits to light up LEDs, control them with buttons and switches, and even experiment with for LilyPad circuits to react to ambient light levels.
- The Sewing Electronic Kit for Lilypad allows you to explore the wonderful world of electronic sewing and electronic textiles through a series of entry projects using the for LilyPad system.
- Convenient for you to replace the old accessories, and the weight is small.
+
+
Overview
Specs
Reviews
Specification:
Item Type: Electronics Starter Kit
Material: PCB
Purpose: Use conductive sewing thread to connect each PCB board with corresponding function to realize various novel and interesting ideas
Processor: For ATmega168 or for ATmega328
Working Voltage: 2.7V - 5.5V
Input Voltage: 2.7V - 5.5V
Digital IO Feet: 14 (6 of which are used as PWM outputs)
Analog Input Pin: 6
IO Pin DC Current: 40 mA
3.3V Pin DC Current: 50 mA
Flash Memory: 16 KB (for ATmega168, of which 2 KB is used for bootloader)
SRAM: 1 KB
EEPROM: 0.5 KB
Working Clock: 8 MHz
LED Includes Colors: White, red, pink, yellow, blue, green, yellow-green, orange, warm white
Package List:
9 x LED module
1 x Pixel Board WS2812 Purple Disc
1 x Temperature Sensor
1 x ATmega328P 16M 328 Motherboard
1 x USB to TTL 3.3V /5V downloader FT232RL Module
1 x CR2032 Battery Holder Module
1 x Matching/Conductive Sewing Thread/Wearable
1 x Buzzer Module
1 x Wearable Electronics
1 x ADXL335 3-Axes Gravity Acceleration Sensor
1 x Toggle Switch
1 x TEMT6000 Light Sensor Module
1 x Multi-Color LED RGB Module
1 x Button
Note:
Without a protection circuit, the input voltage cannot be reversed or exceed the threshold.
Item Type: Electronics Starter Kit
Material: PCB
Purpose: Use conductive sewing thread to connect each PCB board with corresponding function to realize various novel and interesting ideas
Processor: For ATmega168 or for ATmega328
Working Voltage: 2.7V - 5.5V
Input Voltage: 2.7V - 5.5V
Digital IO Feet: 14 (6 of which are used as PWM outputs)
Analog Input Pin: 6
IO Pin DC Current: 40 mA
3.3V Pin DC Current: 50 mA
Flash Memory: 16 KB (for ATmega168, of which 2 KB is used for bootloader)
SRAM: 1 KB
EEPROM: 0.5 KB
Working Clock: 8 MHz
LED Includes Colors: White, red, pink, yellow, blue, green, yellow-green, orange, warm white
Package List:
9 x LED module
1 x Pixel Board WS2812 Purple Disc
1 x Temperature Sensor
1 x ATmega328P 16M 328 Motherboard
1 x USB to TTL 3.3V /5V downloader FT232RL Module
1 x CR2032 Battery Holder Module
1 x Matching/Conductive Sewing Thread/Wearable
1 x Buzzer Module
1 x Wearable Electronics
1 x ADXL335 3-Axes Gravity Acceleration Sensor
1 x Toggle Switch
1 x TEMT6000 Light Sensor Module
1 x Multi-Color LED RGB Module
1 x Button
Note:
Without a protection circuit, the input voltage cannot be reversed or exceed the threshold.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by SIMPLIZED Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...